If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I haven't used that one in particular (I use a Godlyke powerall) but I have 2 Biyang pedals and IMO the quality and sound is great. So I would have no problem trying out their other stuff.
Biyang is a relatively old power supply manufacturing company so to a degree reliability (with a caveat) will probably be okay. The caveat is you have to check the max current the supply can provide (400ma) vesus what your pedals draw. A standard Boss PSA adapter provides 200ma so if you hang 5 200ma pedals off that thing you are looking at a overheat/blown fuse/melted adapter. I believe the "average" pedal probably draws under/around 100ma so I wouldn't feel comfortable using that to power more than 4.
I would recommend going with a power supply designed for the job like a Voodoo Lab pedal power, Gator G-bus, etc...
I would ask about it just to make sure but it says 400ma x5, should mean 2000ma which is what my Godlyke is and that would be fine for a bunch of pedals.
That one will not have any current issues. Shared power bus means that if one pedal creates noise over the power then all the pedals will get it. Thats why the more expensive products offer isolated outputs.
^^ Hellbats on the money with that description.. I haven't had any problems at all but who knows. Also, I can't power my 18V EQ with it. Check the ratings for the pedals you want to run.
Check the pedal specs. Most Boss pedals draw between 4 and 15 MA per pedal. Add up the total draw from the 5 pedals and if its under the max output of the power supply you are good to go.
MrHiwatt
Mesa JP-2c Mesa 2x12 V30
RR1 Black
RR1 Blue ghost flames
Stealth EX
Hamer Studio
Boss pedals,TC, HBE
I have, use and LOVE all of my Biyang pedals. I talked about them here on the JCF and a only a few folks seemed kind of warm to them...the rest of you guys are GEAR SNOBS!!!!
I have 4 different Biyang pedals and they all excel in what they do.
Now that power supply you posted about....pure shit. It is a huge hiss maker. There are MUCH better options out there, I went with the One-spot, but there are more than a few to choose from.
I live on the edge of danger facing life and death every single day.....then I leave her at home and go disarm bombs.
Well I found a 9volt 600mA transformer with the right outlet size and also found 2 others that were just sitting around... So I spliced the wires to reverse the polarity and soldered all of the wires together and saved some money... she ain't pretty but no hum and works great!!!
The tape I used is nylon... why did I not just use the three I found... well because the other two transformers were 12 volts
Comment