Full stack cable question???

[Chief_CrazyTalk]

It's already been said, but I can't emphasize it enough...one to one. No daisy chaining, ever. And crank that sucker!

[straycat]

I stand corrected and thats cool I learned something too.
Slayer you are a good guy I did some research and you are correct I was wrong sorry Axe.

[leftykingv2]

I stand corrected and thats cool I learned something too.
Slayer you are a good guy I did some research and you are correct I was wrong sorry Axe.

In Strays defense I have seen amps that call for daisy chaining in the past.

[straycat]

I have done tube amps that way but my mark III boogie I used the 4ohm inputs on the head thinking the 8 ohm cabs together would be 4 ohm.I could be wrong again.

IIRC I saw that on the Mesa site.
I figured why have an in and out on a cab if they want you not to daisy chain?

[leftykingv2]

I have done tube amps that way but my mark III boogie I used the 4ohm inputs on the head thinking the 8 ohm cabs together would be 4 ohm.I could be wrong again.

IIRC I saw that on the Mesa site.
I figured why have an in and out on a cab if they want you not to daisy chain?

You would be correct Sir. Two 8 ohm cabs into a 4 ohm head unit output would be a perfect match and that is one instance where daisy chaining is acceptable. Also I know where you're coming from with the extra input on the cab being there. Some companies have them and some don't. I also share you're confusion on the amps that say not to daisy chain but then have the two inputs on the cab as well. Especially when the manual says nothing about the other input/output. I look at those like WTF?????:think:

[VitaminG]

I have done tube amps that way but my mark III boogie I used the 4ohm inputs on the head thinking the 8 ohm cabs together would be 4 ohm.I could be wrong again.

IIRC I saw that on the Mesa site.
I figured why have an in and out on a cab if they want you not to daisy chain?

that's for when you want to run 4 16ohm cabs with your 4ohm head!

[leftykingv2]

that's for when you want to run 4 16ohm cabs with your 4ohm head!

That actually makes perfect sense. Thanks for the knowledge!!

[axe dude]

I stand corrected and thats cool I learned something too.
Slayer you are a good guy I did some research and you are correct I was wrong sorry Axe.

Mo problem Buddy...It's all good! It seems like I learn something new on here all the time! Better to ask than BLOW your Rig to the Moon Etc! LOL! \m//

[axe dude]

It's already been said, but I can't emphasize it enough...one to one. No daisy chaining, ever. And crank that sucker!

Don't worry Dude....THIS STACK IS S-I-C-K IN THE VOLUME DEPARTMENT & I have only had it on like 1-1/2 to 2.....it's Awesome! LOL! Thanks! \m/

[leftykingv2]

Mo problem Buddy...It's all good! It seems like I learn something new on here all the time! Better to ask than BLOW your Rig to the Moon Etc! LOL! \m//

I've blown an output transistor or two in my time and they don't actually blow up. It just goes pop quietly and a little smoke goes up and the power goes out. I did it to an old Marshall Valvestate 8100 and it cost $85 bucks to fix in 1993. Sucked!!!

[axe dude]

I've blown an output transistor or two in my time and they don't actually blow up. It just goes pop quietly and a little smoke goes up and the power goes out. I did it to an old Marshall Valvestate 8100 and it cost $85 bucks to fix in 1993. Sucked!!!

I am sure it did Dude! Thanks again for the info! That's why it's always cool to ask questions FIRST & then BREAK your Gear later! LOL! I figured since the Amp had the (2) Speaker Outputs it was to run (1) to each but you never know? Some would have just went with it & probably fried something when all it would have taken was a simple question & some time. I have learned to become patient with things & wait a bit...in this case it was all good. I still can't believe HOW LOUD this stack can actually just "Start To Get"! LOL! Take It Easy Buddy! \m/

[leftykingv2]

You could drown out a jet taking off with that thing bro!!! Crank it up brotha!!!!

[axe dude]

You could drown out a jet taking off with that thing bro!!! Crank it up brotha!!!!

LOLOLOLOLOL!!!!!!!!!!!!!!!!! YOU KNOW IT DUDE! LONG LIVE THE M-E-T-A-L! \m/

[straycat]

Never underestimate a Randall SS amp I love em'.
The rack Randall power amp I had was a beast and loud as hell in a good way.

[toejam]

It's already been said, but I can't emphasize it enough...one to one. No daisy chaining, ever.

I've got a pair of vertical Jackson 2x12 cabs that are both 8 ohms, and they've got inputs and outputs on them. I can't recall ever daisy chaining them, but I'd think I should be able to.