There are so many ways... get a BBE or Evantide! Or use your Wah, or a volume boost pedal, or an eq pedal for boost, or get a second OD or gain boost, or correctly configure a 2nd amp channel. A delay or chorus... Or.... you want pre or post? Put a EQ in the loop. That's probably my favorite way. I have a modded MXR M108 I keep in my fx loop... it is SUPER quiet.
Announcement
Collapse
No announcement yet.
How to thicken up my solo's
Collapse
X
-
I got an idea... you have lots of gear. You've probably already tried most of the options at one time or another.
Take a bit of time. WRITE down every signal chain combo that you try and a word to describe it. SUCK. NOISE. GOOD. whatever... Might help you see something obvious that you haven't tried.The 2nd Amendment: America's Original Homeland Defense.
Comment
-
The only way I know is to start off with an amp that has a very dry sounding gain like a VHT Pitbull or something along those lines. The wetter the amp the thinner the lead tone will be. You can always use an eq in the loop to get a wetter sound for your leads and rhythm but it is always harder to get an amp to be dry if it isn't there tonally from the get go imo.
Comment
-
^^what he said. John you have a Boss GE 7. I have an MXR 10, same difference...boost some of the mids just a little. Or, if you amp is too scooped. Bring the the mids up a little.
Hey Chris!! that 7 string is working great for me. My son didn't take to it. So I got it back and goin' crazy with it. That's how to thicken you leads tones. 6/7 string loaded with Slinky hybrid 10s tune to Eb ..w / Bb of course...or get an 8, 9 10 strings like Xeno and Joe.
Yes, the wetter the amp the thinner it will sound. Many, like The Ammot bros use a Boss Octave..OC 2, or OC 2. Some guys named Jimi, Uli do that too.
A BBE pedal Sonic Stomp can do the trick too during solos. Many just use a stomp such as a Boss DS-1. Gain down , Level maxed. Most of the players you mentioned do exactly that as a solo boost.Last edited by horns666; 11-02-2015, 07:14 PM."Bill, Smoke a Bowl and Crank Van Halen I, Life is better when I do that"
Donnie Swanstrom 01/25/06..miss ya!
"Well, your friend would have Bell's Palsy, which is a facial paralysis, not "Balls Pelsy" like we're joking about here." Toejam's attempt at sensitivity.
Comment
-
Have you tried running a wet/dry rig?? to me its the best of both worlds, totally un-effected main tone with all your effects sitting slightly lower/behind that. I run 4 1x12 cabs in an X pattern so both tones blend a little better. It is what the "pros" tend to do to make everything BIG....yes it means more cabs and running 2 amps but you won't be disappointed with the results
Comment
-
You guys nailed it about distortions/overdrives thinning out the tone. I also like a really thick solo tone without having to up the bass or use the neck pickup.
Having said that, within the last year or so I tried a ton of pedals against my Marshall JVM410H and Carvin X100B Reissue. The winner:
Digitech Hardwire SC-2 Valve Distortion. No kidding. It's the most organic sounding, tube-like distortion box I've ever used, and unlike all the others I tried (even though some are really good), it doesn't cut the frequency range for the sake of tightness; rather, it gives tightness while preserving the warmth and broadness of the signal.
Member - National Sarcasm Society
"Oh, sure. Like we need your support."
Comment
-
Originally posted by jgcable View PostI tried a Tubescreamer in front but I don't like the way the amp loses its girth when engaged. Sure.. I get more gain and more midrange but the bottom end girth drops out. I had better results using a Boss SD-1 Super Overdrive but even that pedal seems to "neuter" the DSL.
Comment
Comment