Announcement

Collapse
No announcement yet.

Best Midi Pedal for JMP-1 & G Major 2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Best Midi Pedal for JMP-1 & G Major 2

    I am running a Marshall JMP-1 Preamp into a TC electronics G major 2 and now need a Midi switcher to change presets on both. Any suggestions ? Anyone used Peak.

    I also have an Digitech RP1000 that I was using for FX only with the JMP-1 for Overdrive and a Blackstar HT-50 head for clean and also power amp through an Orange single 12 PPC112. This setup sounded pretty good but way too many cables involved for set-up.

    Regards
    Paul

  • #2
    I thought the G major had Midi control does it not?

    Comment


    • #3
      I see a lot of people using the FC1010 but I don't have experience with this.

      Comment


      • #4
        I used Roland GFC-50/Boss FC-50 with mine. Simple, solid.

        Comment


        • #5
          When I had a JMP-1 I used a Midibuddy.

          Comment


          • #6
            I use a GFC-50 as well. But there is no 'best' it all comes down to what you need, how you like the feel etc.

            Comment


            • #7
              If the RP1000 has pedal buttons and treadles, that's your MIDI controller. You don't have to use the sounds, just map it to whatever you want the JMP and G-Maj to do. However, individual effects on/off might not be possible.

              I'd recommend the ART X-15 for the dual treadles at least.
              I want to depart this world the same way I arrived; screaming and covered in someone else's blood

              The most human thing we can do is comfort the afflicted and afflict the comfortable.

              My Blog: http://newcenstein.com

              Comment


              • #8
                An old Roland FC-200 might be an idea

                But if it's just about changing presets, any basic midi pedal can do the trick
                "There's nothing taking away from the pure masculinity I possess"

                -"You like Anime"

                "....crap!"

                Comment


                • #9
                  Rocktron midi-mate is probably a good choice.

                  Comment


                  • #10
                    A Ground Control Pro can be had pretty cheap used. Usually under $250 and does Program Change and Continuous Control. Plus you can name your patches.

                    Comment


                    • #11
                      I use a Disaster Area DMC 8 with my JMP-1 and G force.
                      My hair is on fire!!!!!My hair is on fire!!!!!!
                      Marshall 2205, 6100, 6100LM, JMP-1, EL84 20/20, VHT 2/50/2, Marshall 1960A & B cabs, '79 Strat, '84 Pacer, '98 Wolfgang, '08 Charvel San Dimas x 3.

                      Comment


                      • #12
                        Here is a link that might help you out!

                        Comment


                        • #13
                          VL Ground Control.

                          Comment

                          Working...
                          X