Good metal cab?

[model1]

Re: Good metal cab?

theoretical:
can you mix up speakers in one cab?
upper 2 v30
down 2 g12t75
would that make sense?
andy

[catzodellamarina]

Re: Good metal cab?

Mixing speakers in one cab - Randall makes that cab with the 2x12's and the sub. Anyone played through one of those?

I play through a 5150a and a 1960a on opposite sides of the stage. The Peavey is definatly the more metal/thrash of the two. It's high end sings carries the leads better too. It seems louder too. I had to use weather stripping and a long deck screw through the back to eliminate the cabinet farting. Since then it pounds the lows too.
The Marshall is good but you don't know what your missing until you do a side by side comparison.

[zeegler]

Re: Good metal cab?

Originally posted by model1:
theoretical:
can you mix up speakers in one cab?
upper 2 v30
down 2 g12t75
would that make sense?
andy

<font size="2" face="Verdana, Helvetica, sans-serif">You could have 4 different speakers of different power handling if you wanted. As long as your cabinet impedance matches the output of your head, you're good to go.

Remember, parallel connections divide, and series connections add.

[Kyle G]

Re: Good metal cab?

Id go with a peavey 5150 cab if you are on a budget or a Bogner Uberkab if you have the extra money to spend.

[Argos]

Re: Good metal cab?

What do those Ubercabs run anyway?

[wyldefan]

Re: Good metal cab?

$950 for a Uber cab.

[model1]

Re: Good metal cab?

Originally posted by zeegler:
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by model1:
theoretical:
can you mix up speakers in one cab?
upper 2 v30
down 2 g12t75
would that make sense?
andy

<font size="2" face="Verdana, Helvetica, sans-serif">You could have 4 different speakers of different power handling if you wanted. As long as your cabinet impedance matches the output of your head, you're good to go.

Remember, parallel connections divide, and series connections add. </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">i meant would that make sense for a good sound

[RacerX]

Re: Good metal cab?

Originally posted by Tim Krueger:
$950 for a Uber cab.

<font size="2" face="Verdana, Helvetica, sans-serif">Maybe he meant, what speakers are in there? [img]graemlins/scratchhead.gif[/img]

[Argos]

Re: Good metal cab?

Nah [img]images/icons/grin.gif[/img] I was just comparing them to the ENGL cabs price wise.

[dying fetus]

Re: Good metal cab?

My vote goes for a VHT Fat bottom cab with P50E speakers.

I have this cab and absolutly love it. THe highs are pretty well deffined and don't hide underneath the awsome bottom end that this cab has.

hope this helped


Spart-xAnusx

[model1]

Re: Good metal cab?

hey,
what´s a jcm800 usually loaded with?
g12t75, greenbacks, v30s ??
i finally get one next week
at first i think i´ll wire it up for 4Ohms instead of 16
i think i´ll be very happy with it
it sounded nice, but with a little low output, this will be better with 4 Ohms
andy

[RacerX]

Re: Good metal cab?

Mine has G12-65

It's a combo from 1984

[Boxcar Willie 84]

Re: Good metal cab?

[img]images/icons/shocked.gif[/img] Ron those are rare! I've always wanted to try one...I think Twisteramps and Chuckracer both have cabs with them.

[model1]

Re: Good metal cab?

i spoke about a jcm800 4x12 cab [img]images/icons/smile.gif[/img]

[RacerX]

Re: Good metal cab?

Originally posted by Boxcar Willie 84:
[img]images/icons/shocked.gif[/img] Ron those are rare!

<font size="2" face="Verdana, Helvetica, sans-serif">Really, I didn't know that. [img]graemlins/idea2.gif[/img]