hooking up a crate power block

[dk1ben]

Yes I did try searching for this already

However what I found was for applications not like mine. I have bought a Crate power block. Along with the crate 1x12 that was made for it. I want to run my GNX1 through this set up. What is the best way to do this.

Guitar>GNX1>PowerBlock>Speaker

or

Guitar>PowerBlock>Speaker... with the GNX1 going in the loop?

If you suggest the loop. Which port, the IN or OUT or actually make a loop with the GNX1?


Thanks for any input.

[Norton]

Are you using the GNX as an fx unit or the preamp?


If it's the preamp, the first line,


If it's the fx, the second one.

[dk1ben]

I want to use the amp models it has. So pre-amp it is. Guess I could of figured that out myself. Thanks.

[Dreamland_Rebel]

i like to run the modeling pre's like this

guitar->modeling preamp pedal->FX return on powerblock->speaker.

this way the powerblock is only used for power. with all volume, eq, and effects controled by the modeling pre you are using.

[Carbuff]

i like to run the modeling pre's like this

guitar->modeling preamp pedal->FX return on powerblock->speaker.

this way the powerblock is only used for power. with all volume, eq, and effects controled by the modeling pre you are using.

+1 Thats the way I had mine setup with the vamp pro.