Celestion 30watt speaker question

[beachjammer]

Hey guys,
I've got a Mesa 50 watt Rectoverb combo with a 60 watt vintage 30 speaker in it. I just purchased a Mesa 1x12 cab that has one of the new celestion 30 watt G12H speakers ( see link http://www.zzounds.com/item--CELG12H3008 ) Since my amp is only 50 watts and I am also running another speaker with this one do you think that there is a chance I could blow it? I hardly ever run the master volume past 3 on my amp. I didn't know if I might need to switch this out with another vintage 30. Give me your thoughts.

[markD]

it should be fine!!!

[Robotechnology]

As long as you have the right speaker resistance jacks plugged in, you'll be having 30 watts go to each speaker. No worries. I use my H with 50 and 90 watt amps

[beachjammer]

Thanks!

[ADR]

As long as you have the right speaker resistance jacks plugged in, you'll be having 30 watts go to each speaker. No worries. I use my H with 50 and 90 watt amps

Yeah, if your pushing both no worries, That 30W green should crunch really well. I had a .50cal back in the day (the 1st ones with 4-EL 34's) and I blew the 90W Cel/black shadow. Well I did have a Duncan HM livewire in the bridge in my Jackson.