Amps

[lhrocker]

Currently using the following:

Randall RM100 into vintage Marshall 4x12 w/Greenbacks - Rock to Metal
Carvin V3 into Mesa 4x12 Half back - Rock to Metal
Vetta HD into Flextone 4X12 - Everything
Flextone II head into Peavey XXX 4x12 - Everything
Laney Pro Tube 50 into H&K 4x12 - Classic Rock/HR

[jgcable]

50w JCM900 running EL34 Mullards, Marshall 1960B with Vin 30s's, Crybaby, DD3, Lil Alligator Volume pedal in the loop and a CH1 chorus pedal

[slash-ed]

Hmmm, my setup has changed since this thread was last unearthed. Now running a Line 6 Spider Valve HD100 into Carvin Legacy 2x12". Has served me extremely well sound-wise for covers gigs and metal tones alike. Although the hardware is a bit cheap and one or two of the knobs on the amp have started to crack.

[///MK]

For Me its a 3tm ADA MP1 ->gmajor -> BBE into a Rocktron Velocity 300 or 5150 head all this drives a couple of mesa boogie cabinets one stilleto straight and one rectifier slant.
I keep trying but I cant remove myself from my ADA. I had one since high school (80's).

I play a style described as Dream theater hanging out at a Maiden concert
///MK

[horns666]

Amps..I don't need no stinking amps!!!

Floyd Rose is my sheppard..I shall not want.





























amen

[Guitardude86]

[åron]

Guitar plugs into Lexicon G2, splits signal to VHT Sig X and Guitar Rig 3. FX Send from the Sig X to the return on the Lexicon. The G2 and Guitar Rig feed into Rane mixer. The Rane mixer feeds to the return on the VHT attached to a Deliverance 4x12 and a satellite Peavey attached to an open back EV 1x12. Big sounds!

I'm considering going to a ground control and pedals setup as the trusted Lexi has become a tempermental dinosaur. Still love that unit for the true bypass and digitally controlled analog gain and compression, though.

[themisfit138]

Mesa Mark IV
Mesa 2x12 cab with EVM-12L speakers

[bloodlust]

Marshall VS-100 head into a b-52 AT-412 cab, and i play punk and metal and such

[phill_up]

I have neighbors and a family so I had to be creative.

An old USA Fender hotRod Deluxe that i loaded with a "pair of the JJ 6V6's to drop the output and get an earlier breakup along with three hand picked high gain ECC83S's with one of them being balanced for the phase inverter in V3." and the bias setting is pushed to the limit, powering a celestion classic lead 80, sitting on an extension cab with 2 12" celestion V30's

I'm still a sucker for stomp boxes but can get by with just 3. The Boss CS-3, MT-2 and the DD-6 through the FX loop

[kmanick]

For the real heavy stuff I use my Rectoverb head,
for everything else I use my JSX. (I use that for the heavy stuff too)
I'm looking into picking up a Mark III or a Mark IV as well.
Life is good.

got a couple of 7's

and a couple of 6's

[Shawn Lutz]

dang a thread brought back from the dead

Bill did you put a Floyd on your Uber? Does it make it more brootlze and shit?

[VitaminG]

For the real heavy stuff I use my Rectoverb head,
for everything else I use my JSX. (I use that for the heavy stuff too)
I'm looking into picking up a Mark III or a Mark IV as well.
Life is good.

got a couple of 7's

and a couple of 6's

and a 22 piece screwdriver set!

So we can see you've got the tools....

[horns666]

dang a thread brought back from the dead

Bill did you put a Floyd on your Uber? Does it make it more brootlze and shit?

That's right Shawn. Most people like Floyds on their guitars. Not me, I put one on top of my amp, it works...and I installed in a toaster tray for pop tarts.

Wassup Nick, where you been hiding.

[KINGSFAN]