BOSS GX-700 Fctory Reset Procedure

[wilkinsi]

Roland have removed it from their site, and I don't have the paper manual. Does anyone know which buttons you hold down as you power up?

[emperor_black]

hey wilki, I contacted a seller on ebay who was selling a gx-700. here's the procedure. Hope it helps.

Press the [Tuner/Utility] button; Use the [Parameter <>]
buttons to access the "Factory Init" page; Select the range of
patches and/or system parameters you want to reset; Press
[Write].

[rjohnstone]

This selection is from Knowledge Base Article #104856 available at:

http://backstage.rolandus.com/knowledge_base/index.php?HD_ID=104856

__________________________________________________ ____________________
TITLE: Initialization (Factory Reset)

The following procedure can be used to clear the internal memory and reload the factory settings in the GX-700:

(CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.)

1. Press TUNER/UTILITY.

2. Press the PARAMETER left or right button to select FACT INIT [WRITE].

3. Press PARAMETER left or right to move the cursor to the lower left of the display.

4. Turn the NUMBER/VALUE dial to select "SYSTEM."

5. Press PARAMETER right once.

6. Turn the VALUE dial to select P#100.

7. Press WRITE.

8. When the reset procedure is finished, press PLAY to return to the main menu.
__________________________________________________ ____________________
End Knowledge Base Article #104856

[wilkinsi]

Thanks!