what order would YOU guys have my pedals in ?

[Tim_B]

after a bit of trial and error, I've finished up with ...

guitar => TU-2 => SD-1 => BD-2 => HF-2 => DD-6 => CE-5 => 2 amps

reading around the subject, I've got them in the 'wrong' order, I 'should' have the last 3 delay based pedals at the start of the chain.
I like the TU-2 at the start, so it gets a clean signal, and I use it to cut the signal to the rest of the path when I'm not playing
I like the HF-2 to get an overdriven signal cause I get a more extreme flange that way
I'm thinking about swapping the DD-6 and CE-5, so I have a stereo chorus into stereo delay into stereo out, just haven't tried it yet

If that was YOUR pedal board, what order would you guys have them in ?

[JacksonVHT]

Guitar -> Input Preamp -> Input Power Amp -> Input Speaker A & B

[horns666]

Guitar -> Input Preamp -> Input Power Amp -> Input Speaker A & B

You forgot your TS-808!

[horns666]

BTW..I always put my delay last in line..when I used pedals.

[JacksonVHT]

You forgot your TS-808!

That's only for the Framus!

[Mordor]

I would swap chorus and delay position too.

[Newc]

after a bit of trial and error, I've finished up with ...

guitar => TU-2 => SD-1 => BD-2 => HF-2 => DD-6 => CE-5 => 2 amps


If that was YOUR pedal board, what order would you guys have them in ?

Horizontal chain won't work for me, I'll have to go vertical.

 
                            Guitar
                               |
                            TU-2
                               |
              EB High-Gain Volume Pedal
                               |
                            SD-1
                               |
                             ABY
                           /      \
                       BD-2    MXR Dist+
                           \      /
                             ABY
                               |
                          Crybaby
                               |
                             ABY
                            /     \
                      CE-5    HF-2
                           \      /
                             ABY
                              | 
                            DD-6 
                           /      \ 
              PowerAmp1      PowerAmp2

Better yet:

SD-1 => Ebay
BD-2 => Ebay
CE-5 => Ebay
HF-2 => Ebay
DD-6 => Ebay
$$ => Digitech RP350

[VitaminG]

I would swap chorus and delay position too.

+1. Everything else looks fine to me

[DonP]

Is he doing the CE-5 in stereo out to two amps? If so, the DD-6 would only be on one amp channel or you would loose the stereo effect?

(edit: I've never been big into pedals, just guitar amp and a cord. I do have a Crybaby, an MT-2, a TS-10, and a MidiVerb 4 (i think) that get used next to never).

[Dreamland_Rebel]

i think your order is fine.
try going to www.amptone.com and reading some articles to get an informed OPINION of signal flow.

[Tim_B]

Is he doing the CE-5 in stereo out to two amps? If so, the DD-6 would only be on one amp channel or you would loose the stereo effect?

(edit: I've never been big into pedals, just guitar amp and a cord. I do have a Crybaby, an MT-2, a TS-10, and a MidiVerb 4 (i think) that get used next to never).

yes, CE-5 to two amps, but the DD-6 is stereo in and out .. so it could go after the CE-5 no problem

and thanks guys, I appreciate the comments

[bibz]

Yeah swap the last two as said. How good does the hf2 sound by the way! My favourite chorus/flange/phaser pedal I've tried so far.