i'll get pics of the PU cavity tomorrow, the rear trem route is all blacked out with black marker, hopfully the pickup cavity wont be, I'll have to borrow a better cam, those are with a 2.0 megapix gateway DC-T23.
Announcement
Collapse
No announcement yet.
opinion on pre-pro EVH pics
Collapse
X
-
That one looks real good to me and I would like to see if the body is dinged up (just not through the clear). Its had to tell in the pics, but it looks like there might be some dings. Wood aging and matching are probably the best way make a guess as to originality of the neck to the guitar IMHO, but nothing is for sure. It is at least possible that the factory did a swap (and we have all heard about stores doing it). Also, looks like someone swaped the buttons for strap locks ."I''ll say what I'm gonna say, cuz I'm going to Hell anyway!"
Comment
-
What is the difference between a Strat head that is worth $2k-$3k and one worth several times more? That yellow/black body. It is easy enough to get period correct parts, that is for everything except an original finish body. With the market for vintage Fender Strats "correct" parts are readily available to anyone that wants to put together a guitar. The trick is determining if they are original to the guitar and if the finish has been tampered with. The crowd here seems to be way more accepting than the crowd that buys and sells $25k guitars.
Seeing those extra screw holes in the neck is a major red flag for me. There is no reason for an un-dicked with guitar in that condition to have extra holes. It's more likely the neck came from another guitar and once you open up that can of worms it might as well be a parts guitar.
It may be a 100% original guitar. There is no way to determine that from these pic's. I would want to have it apart and go over it with a magnifying glass before I bought it.
Comment
-
Originally posted by LarryL View PostWhat is the difference between a Strat head that is worth $2k-$3k and one worth several times more? That yellow/black body. It is easy enough to get period correct parts, that is for everything except an original finish body. With the market for vintage Fender Strats "correct" parts are readily available to anyone that wants to put together a guitar. The trick is determining if they are original to the guitar and if the finish has been tampered with. The crowd here seems to be way more accepting than the crowd that buys and sells $25k guitars.
Comment
-
Originally posted by mudkicker View PostSo you have to be a little more accepting of a custom shop guitar than a mass produced production piece.
Best case it is a 100% guitar. Worst case someone took a pre-pro and mated the neck and all the parts to a new or refinished body (hence the extra holes but proper parts, pot date codes, etc.). Based on that neck I would never buy it without going over it in person. It may be fine but that is a big red flag to me on an expensive guitar.
Comment
Comment