Pickup wiring help!!!!

[doommaker]

HELP ME! I'm trying to put a humbucker in the neck of my DK2, and the wiring color code is as follows,

White - North Start for front part of humbucker
Black- North finish for front part of humbucker
Green- South finish for rear part of humbucker
Red- South Start for rear part of humbucker

How can i wire this? The middle pickup is stock, the bridge is a Dimarzio.

[lantz_c]

Re: Pickup wiring help!!!!

These links may help you

http://www.guitarelectronics.com/diagrams.html
http://www.guitarelectronics.com/wiring/colorcodes.html

[WARLORD]

Re: Pickup wiring help!!!!

I have a kelly 3 japanese. It haves duncan designed pickup detonator, but i want to put EMG pickup. Which is the best between an EMG 81 and EMG 85. I want a strong sound but clean. I play black metal, Death and Thrash. HELP ME !!!

[jgcable]

Re: Pickup wiring help!!!!

Originally posted by doommaker:
HELP ME! I'm trying to put a humbucker in the neck of my DK2, and the wiring color code is as follows,

White - North Start for front part of humbucker
Black- North finish for front part of humbucker
Green- South finish for rear part of humbucker
Red- South Start for rear part of humbucker

How can i wire this? The middle pickup is stock, the bridge is a Dimarzio.

<font size="2" face="Verdana, Helvetica, sans-serif">It should go like this:
Red is hot
Green is ground (there should also be a bare ground wire)
Connect black and white together and tape them off. If you wire them to an on/off switch they will become a coil tap.