San Dimas HSS Wiring Question

[gopackgo]

I have a Charvel HSS San Dimas with a 3 way toggle switch. I want to set it up so it has 2 Volumes (250k for single coils & 500k for humbuckers) and 2 tone pots (250k for single coils & 500k for humbuckers). I am using 2 Concentric 250K/500K pots to accomplish this. Does anyone have a wiring diagram like this?


Lastly is it possible to direct wire both single coil pickups to one 250K Tone Pot (Before the Toggle Switch)? Or will wiring two pickups to one tone pot cause problems?

Thanks

[Tetsuo]

Have you checked Dimarzio or Duncan's websites for diagrams? They have pretty extensive ones I last checked. I am primarily a hum hum guy possibly with coil taps so that is what I know.

[neilli]

I don't think you can wire 2 pickups to the same pot before the switch because the pot only has one output i.e. both pickups would be in the output from the pot. Perhaps a push/pull pot or similar might work though..