Announcement

Collapse
No announcement yet.

Jackson Rhoads V RR3 Serial Number ID

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jackson Rhoads V RR3 Serial Number ID

    I just bought this Jackson Rhoads V. I believe its an RR3. I am not sure if that is correct? Can a forum member confirm this?

    Can someone advise as to where the point of origin when and where was my Jackson Rhoads V produced.
    I just love my Jacksons and I am becoming heavily addicted to them.
    My Best ACRocks



  • #2
    Yes, it's a Japanese made RR3. Is the serial 9692xxx?
    If so, it'd be 2002-3.
    The neck pocket would have date stamps if you'd like to narrow it down.
    96xxxxx, 97xxxxx and 98xxxxx serials oftentimes don't indicate '96, '97 and '98.

    Comment


    • #3
      Thank you Mudlark you are the coolest Canadian. Yes serial is 9692135. Although I would hate to take neck pocket out and have to intonate and readjust truss road.

      My Best
      ACRocks

      Comment


      • #4
        Does anyone know what type of Jackson Floyd Rose Tremolo is in a Jackson RR3? I have a picture of my Jackson RR3 including the serial number. Thanks



        ACRocks

        Comment


        • #5
          It's a JT580LP.
          I feel my soul go cold... only the dead are smiling.

          Comment


          • #6
            Thank you toejam U Rock!! Toejam! Is Slayerville, a city in New Jersey?

            Thanks
            ACRocks

            Comment


            • #7
              You're welcome. It's really Sayreville.
              I feel my soul go cold... only the dead are smiling.

              Comment


              • #8
                I have a Jackson Rhoads RR3 MIJ with a JT580 LP. Can I swap out the JT580LP out for an Original Floyd Rose. Will the Original Floyd Rose fit in the Jackson RR3 cavity, or will I have to do some routing on the guitar? I am also concerned about the dimension of the mounting screws for the Original Floyd Rose Will I have to fill and insert a dowel to fill the mounting holes when installing the Original Floyd Rose Tremolo System.
                Thanks ACRocks
                Please see below hyperlink for reference.
                https://acrocks666.wixsite.com/jacksonrhoadsv







                Comment


                • #9
                  An Original Floyd Rose is a 100% direct replacement, no routing required. See below. Original source of info: http://audiozone.dk/index-filer/Trem...ct.htm#jt580lp

                  JT-580LP
                  Replacing with a Floyd Rose Original (or similar)
                  Several users have done this swap with success. The JT-580LP route seems a little larger than the JT-580 route, so there's more room for the long locking bolts of the OFR. Here's a picture posted by JCF member rjohnstone, showing a swap he did on a Jackson PC3 (in standard 440Hz tuning). Plenty of room there. Read more on intonation here.

                  Studs and stud inserts are typically a direct swap here too if you need that. Sometimes the new stud inserts are a wee bit too large to fit the holes in the guitar. Don't use excessive force like using a hammer to pound them in! You are running a high risk of cracking the wood around the posts. Drill to the correct size holes instead and press them in, in a controlled manner.

                  Comment


                  • #10
                    You Rock! Number of the Priest! Thank you for your expertise and guidance. U R quite knowledgeable with Jacksons! U Made my Day!
                    Rock ON!!
                    https://soundcloud.com/opus-shred

                    Comment

                    Working...
                    X