If you could make J/C build one thing for NAMM, what would it be?

[Aso]

An Soloist or Dinky with a Hannes bridge, 1 humbucker, volume in the tone position and no tone knob.
Pavo Purple, black hardware, black TUSQ nut.

Bringing Grover back would be amazing just for the thought of it.

I agree with a Soloist with a Hannes. I think my KV and baritone KV are one of the few Jackson's with a Hannes. Be nice to not have to pay a Masterbuilt fee just for the bridge.

[j2379]

Star as a CS select option

[Carcaridon]

A Soloist with mahogany body and neck
3 ply neck... no scarf joint and full depth center body/neck joint
Pointy headstock
Urethane Snow White finish body and headstock
Natural unfinished oiled neck
Graphite reinforced trussrod
Ebony fretboard
Stainless frets
White, eurethane finished binding on neck and headstock
Satin chrome hardware
Abalone logo, 90s, 100% with thin black outline
Abalone “Made in USA” and “Custom Shop” on headstock
Abalone pirhana inlays
Schaller non-locking tuners and strap locks
Titanium OFR with Tungsten sustain block, noiseless springs and a brass claw, non recessed
Bareknuckle Ragnarok in bridge and Emerald in neck, natural mounted (no pup rings)
3 way toggle
Single volume (YJM 500k) set 1/2 inch closer to heel, no tone knob
Coil splitting switch
Copper shielded and grounded control cavity
Painted tremolo and pickup cavities
Planet Waves 4 contact gold plated 1/4” output jack
Custom Shop trussrod cover, black on white

I’d buy one of these.

[mr426]

They will now make Firebirds. They have done a few for the last couple NAMMs. I checked with my local dealer and they did confirm it.

[freedom's door]

Limited run replica of Vai's "eye" guitar, but with an unpainted neck.

[Sanctuary]

Bring back the KV1 in fucking Korina.

[Nightbat]

Bring back the KV1 in fucking Korina.

I'm not sure that is legally possible

[z1n]

7-string option for Custom Select. That is all.

Yes!!