If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If the strings are stretched properly and the nut doesnt have any issues to catch the string and makes it stop moving then they stay in tune really well.
Gil
Jacksons, and any other guitar for that matter will stay in tune just fine as long as they are set up correctly, and the strings are stretched sufficiently.
if it becomes a problem you could always just put locking tuners on it. sperzels or similar...
Why would you need locking tuners if you have a guitar with a locking nut,
once locked down the strings shouldn't move past the nut towards the tuners. My Floyd tremolo guitars keep better tune then my fixed bridge Gibson guitars. Kahler tremolo guitars another story.
Most tuning issues on (non-locking) trem guitars are usually due to the strings binding at the nut. If you have a guitar that's going consistantly sharp or flat from string bending or trem use, check the nut first. It's a lot cheaper to replace or file a nut than it is to shell out $80 for a set of Sperzels.
Most tuning issues on (non-locking) trem guitars are usually due to the strings binding at the nut. If you have a guitar that's going consistantly sharp or flat from string bending or trem use, check the nut first. It's a lot cheaper to replace or file a nut than it is to shell out $80 for a set of Sperzels.
well for me it isnt lol there arent any real experienced luthiers around my area that i know of. at least the sperzels i could put in myself. no way im going to rip the nut off my guitar
well for me it isnt lol there arent any real experienced luthiers around my area that i know of. at least the sperzels i could put in myself. no way im going to rip the nut off my guitar
Go to a music store and ask around. There's probably a tech nearby who can do that kind of work. A nut replacement isn't triple bypass surgery - most techs can do it without a problem.
Comment