The Mother Of All Info Threads: Part I

[Dave L]

Is the baritone Dinky on there? What was it called... DK27 or something like that, IIRC?

EDIT: The precursors to the DK-2 was the DX-1, right? H/S/S, basswood body, black hardware, bound rosewood. It was also briefly available as the DX-2 (about the same as the DK-3) with H/S/H... not too many of those floating around.

[neilli]

Didn't MF do a red mablizer fusion?

The Charvel Solar was the Charvel Central guitar - v/t, flametop, single hum, pointy.

I don't recall Matt's Chlorine SL1T - could be me being dumb though!

Shouldn't the DK2-LE be under an 'Easton' Dealer Exclusive Model?

I think OSG did a Chlorine SL2H

I don't want to repeat myself, but what about the Musiczoo runs?

[Zerberus]

Charvel acoustics: Wasn´t there also a 325 SL?? Same as my SLX, but w/o binding and sharkies?

USA Jacksons: Student /Custom for practically anything made in late SD and early Ontario (esp. Rhoads, Soloist and KV)

[Newc]

Didn't MF do a red mablizer fusion?

The Charvel Solar was the Charvel Central guitar - v/t, flametop, single hum, pointy.

I don't recall Matt's Chlorine SL1T - could be me being dumb though!

Shouldn't the DK2-LE be under an 'Easton' Dealer Exclusive Model?

I think OSG did a Chlorine SL2H

I don't want to repeat myself, but what about the Musiczoo runs?

Don't be afraid to repeat things. This is a big list and difficult to keep track of at the moment, so if something's missing, keep repeating it till it shows up.

Ok, we need verification and more info on those last three posts:
The MusicZoo Runs
The DX-1 and 2
Charvel acoustics

[NextInLine]

Ok, we need verification and more info on those last three posts:
..
The DX-1 and 2
..

The Dx-1 and Dx-2 appear on 1996 catalog. Dx-1 is basically a dk-2 with professional on the headstock and with some different finish options. Dx-2 is the h-s-h version of it I remember a white dx-1 sold last month or so on e-bay, I didn't save the pictures of it, damn

[jacksonaxes]

Heres my 325-SLX with built in chorus & EQ, flame veneer,rosewood back, and sides.

[charvelguy]

OUTCASTER!

I'll provide pics of a JRS-1, ATX and the Outcaster...maybe a couple more.

[toejam]

Dinky HX (only about 100 made ; 1994 ; 2H ; ST/TOM ; V/T/?-way blade ; 24F ; offset dots

3-way blade, and push/pull tone pot for coil splitting.

[VitaminG]

ATX ...maybe a couple more.

is that the available-to-the-US mid-90s acoustic thingo? Or the made for the rest of the world, late-90s archtop dinky? I have a few pics of the latter, in 3 different colours too!

[charvelguy]

ATX was acoustic /elec import. 24 fret bolt on, 3 band eq, piezo bridge only.
More tele shaped than anything else with a headstock and neck probably off a CTX.

[Dave L]

Since I actually had a DX-1 in white pearl I guess I can elaborate a bit, but like NextInLine said it was in the 1996 catalogues. It´s virtually identical to a DK-2 with black hardware (JT-580LP) except for the basswood body and available finishes. Also I can´t remember if the DK-2 has the little comfort bevel on the front of the treble cutaway, but the DX-1 had it. When I get home from work I´ll see if I can find any pics of it.

The DX-1 also had an elaborate neckplate looking more like the ones from the old imports than the plain-jane plate most imports seem to have nowadays... which I guess also sets it apart from the DK-2.

[neilli]

Ok, we need verification and more info on those last three posts:
The MusicZoo Runs

Matt, the musiczoo runs are as follows:

- Mahogany #1. Oiled body, 1 hum, maple neck and board, strathead, chrome hardware. Not sure of the numbers but I think it was 20 floyd'd and 20 vintage trems.
- Mahogany #2. Floyd and 2 hums. I think there were 10.
- Mahogany #3. H/S Floyd.
- Koa. Single hum. Floyd. Black Hardware. Birdseye neck and board. Strathead. 3 so far but I think there are more to come.
- Maple. As mahogany #1 but floyd only. I think 3 so far and more to come.
- Ash. As mahogany #1 but floyd only. I think 3 so far and more to come.
- Flat black. Mahogany body. Maple neck and board. Strathead. Black Hardware. I think there were 10 if these (not sure if any have sold though!!)

See pics at http://www.themusiczoo.com/charvelguitars.htm

Also, don't forget the maken music guitars:

http://www.gbase.com/Powered/GearDet...c&Item=1516967
http://www.gbase.com/Powered/GearDet...c&Item=1500197

[VitaminG]

ATX was acoustic /elec import. 24 fret bolt on, 3 band eq, piezo bridge only.
More tele shaped than anything else with a headstock and neck probably off a CTX.

cool. That's the one I thought you were talking about.

I have several pics of a different ATX that was available in Europe & Australia. It was an archtop dinky, maple cap, H-S-H, 5-way, licensed Floyd.

[charvelguy]

I'd like to see it.. I didn't realize there was two of the same name.

[busdriver]

The difference is that the acoustic guitar was called "ATX" and the Dinky "AT-X". Watch the hyphen!