Announcement

Collapse
No announcement yet.

Dr Newcenstein's Warmoth Star Project! Part 2

Collapse
X
Collapse
 
  • Page of 5
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • #1

    Dr Newcenstein's Warmoth Star Project! Part 2

    (Part 2 - because of the 8 image limit)

    Now, here's where your opinion counts [img]images/icons/grin.gif[/img]

    Which neck?

    1 - Warmoth maple/ebony Baritone neck


    2 - Jackson maple/ebony AT-1 neck (Paintshopped image)


    3 - Jackson maple/maple with White Pearl head


    4 - Warmoth Birdseye/Birdseye Strathead with fakeass Charvel logo (ignore the clamp)


    5 - SD Jackson reverse head maple/rosewood/MOP fins


    6 - Warmoth maple/maple Strathead (no figuring, just plain maple) (Paintshopped image)


    Newc
    I want to depart this world the same way I arrived; screaming and covered in someone else's blood

    The most human thing we can do is comfort the afflicted and afflict the comfortable.

    My Blog: http://newcenstein.com
    Tags: None
  • #2
    Dr Newcenstein\'s Warmoth Star Project! Part 2

    (Part 2 - because of the 8 image limit)

    Now, here's where your opinion counts [img]images/icons/grin.gif[/img]

    Which neck?

    1 - Warmoth maple/ebony Baritone neck


    2 - Jackson maple/ebony AT-1 neck (Paintshopped image)


    3 - Jackson maple/maple with White Pearl head


    4 - Warmoth Birdseye/Birdseye Strathead with fakeass Charvel logo (ignore the clamp)


    5 - SD Jackson reverse head maple/rosewood/MOP fins


    6 - Warmoth maple/maple Strathead (no figuring, just plain maple) (Paintshopped image)


    Newc
    I want to depart this world the same way I arrived; screaming and covered in someone else's blood

    The most human thing we can do is comfort the afflicted and afflict the comfortable.

    My Blog: http://newcenstein.com

    Comment

    • #3
      Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

      I like #4 and #5, but you should use #4, and sell me the Jackson neck [img]images/icons/rolleyes.gif[/img] [img]graemlins/laugh.gif[/img]

      Comment

      • #4
        Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

        I like #4 and #5, but you should use #4, and sell me the Jackson neck [img]images/icons/rolleyes.gif[/img] [img]graemlins/laugh.gif[/img]

        Comment

        • #5
          Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

          Oh yeah, no question...it has got to be #5!

          Comment

          • #6
            Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

            Oh yeah, no question...it has got to be #5!

            Comment

            • #7
              Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

              That is simple bro... #5

              Comment

              • #8
                Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                That is simple bro... #5

                Comment

                • #9
                  Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                  $150 + shipping for the Jackson neck [img]images/icons/grin.gif[/img]
                  Before you hit that PayPal button, it was only installed on one body - that Ash King V I used to have. The heel on this neck is 2 7/16" wide, but the hole pattern is for a 2 3/16" pocket, and the Star's screws won't line up (it's held in the pocket in the pic by the sides of the neck pocket only - very tight fit).
                  The nut has never been cut, and the tuners (45 degrees) I had on it were righty, not lefty, so the mounting holes are opposite the "correct" lefty/reverse head tuners.
                  The holes for a truss rod cover were never drilled.
                  The fret ends will need to be finished (if not the frets themselves). I think these are Jumbo frets (tall wide like a Soloist Pro).

                  It has a slab rosewood board (1/4" thick), and the logo is white with the TM next to the body of the N, not out near the tip. Head says Made In U.S.A.

                  Just a little full-disclosure for ya [img]images/icons/grin.gif[/img]

                  Newc
                  I want to depart this world the same way I arrived; screaming and covered in someone else's blood

                  The most human thing we can do is comfort the afflicted and afflict the comfortable.

                  My Blog: http://newcenstein.com

                  Comment

                  • #10
                    Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                    $150 + shipping for the Jackson neck [img]images/icons/grin.gif[/img]
                    Before you hit that PayPal button, it was only installed on one body - that Ash King V I used to have. The heel on this neck is 2 7/16" wide, but the hole pattern is for a 2 3/16" pocket, and the Star's screws won't line up (it's held in the pocket in the pic by the sides of the neck pocket only - very tight fit).
                    The nut has never been cut, and the tuners (45 degrees) I had on it were righty, not lefty, so the mounting holes are opposite the "correct" lefty/reverse head tuners.
                    The holes for a truss rod cover were never drilled.
                    The fret ends will need to be finished (if not the frets themselves). I think these are Jumbo frets (tall wide like a Soloist Pro).

                    It has a slab rosewood board (1/4" thick), and the logo is white with the TM next to the body of the N, not out near the tip. Head says Made In U.S.A.

                    Just a little full-disclosure for ya [img]images/icons/grin.gif[/img]

                    Newc
                    I want to depart this world the same way I arrived; screaming and covered in someone else's blood

                    The most human thing we can do is comfort the afflicted and afflict the comfortable.

                    My Blog: http://newcenstein.com

                    Comment

                    • #11
                      Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                      I always liked the plain ole' pointy best on stars so #3.

                      Comment

                      • #12
                        Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                        I always liked the plain ole' pointy best on stars so #3.

                        Comment

                        • #13
                          Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                          #1 but finish the headstock off with the design.


                          Ox

                          Comment

                          • #14
                            Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                            #1 but finish the headstock off with the design.


                            Ox

                            Comment

                            • #15
                              Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

                              Strangly, I like #2 the best, and I'm a strathead freak!

                              Comment

                              Previous 1 2 3 4 5 template Next
                              Working...
                              X