Dr Newcenstein's Warmoth Star Project! Part 2

[BK]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

I think #3 looks great, not only because of the pointy headstock, but also the maple fingerboard. Looks much better than using a fingerboard that is of a dark wood

[ October 10, 2003, 07:40 PM: Message edited by: BK ]

[RacerX]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

REVERSE HEAD!

[RacerX]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

REVERSE HEAD!

[Black Mariah]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

[img]images/icons/grin.gif[/img] I think the AT-1 neck looked better on the Roswell Rhoads than on this. I prefer #3 over the others, but I can't argue with that AT-1 neck. The damn thing just feels soooo nice. [img]images/icons/grin.gif[/img]

[Black Mariah]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

[img]images/icons/grin.gif[/img] I think the AT-1 neck looked better on the Roswell Rhoads than on this. I prefer #3 over the others, but I can't argue with that AT-1 neck. The damn thing just feels soooo nice. [img]images/icons/grin.gif[/img]

[Newc]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

I woulda left the AT neck on the Roswell, but there was a slight problem with the neck bolts not going all the way into the body, and I didn't wanna crank 'em through the board [img]graemlins/laugh.gif[/img]
It held on tight, though, and the action was just as low as with the original neck.
I tell ya, the Grover and Pro Roswell necks are identical except for the head and inlays - the action on both is God-like [img]images/icons/grin.gif[/img]

Newc

[Newc]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

I woulda left the AT neck on the Roswell, but there was a slight problem with the neck bolts not going all the way into the body, and I didn't wanna crank 'em through the board [img]graemlins/laugh.gif[/img]
It held on tight, though, and the action was just as low as with the original neck.
I tell ya, the Grover and Pro Roswell necks are identical except for the head and inlays - the action on both is God-like [img]images/icons/grin.gif[/img]

Newc

[Drake S.]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

Hey Newc what happened to the USA neck I sold you it wouldn't look that good on there huh? You also have a PM from me about a trade idea LoL [img]graemlins/headbang.gif[/img]

[Drake S.]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

Hey Newc what happened to the USA neck I sold you it wouldn't look that good on there huh? You also have a PM from me about a trade idea LoL [img]graemlins/headbang.gif[/img]

[Firebird V]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

MY GOD! The Boy has gone MAD!!!!
[img]images/icons/wink.gif[/img] MUhhahhahhhahhaahahahahAAAH [img]images/icons/wink.gif[/img]

[Firebird V]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

MY GOD! The Boy has gone MAD!!!!
[img]images/icons/wink.gif[/img] MUhhahhahhhahhaahahahahAAAH [img]images/icons/wink.gif[/img]

[Newc]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

Drake - the block inlay neck is 24 frets, so it wouldn't have worked without hacking the neck pocket's rear wall, and I didn't wanna go that far - yet [img]images/icons/grin.gif[/img]

Newc

[Newc]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

Drake - the block inlay neck is 24 frets, so it wouldn't have worked without hacking the neck pocket's rear wall, and I didn't wanna go that far - yet [img]images/icons/grin.gif[/img]

Newc

[Newc]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

And I should add that only ONE person has mentioned anything about the King V in that last pic [img]images/icons/grin.gif[/img]
What are you people, blind? [img]graemlins/laugh.gif[/img] [img]graemlins/poke.gif[/img]

Newc

[Newc]

Re: Dr Newcenstein\'s Warmoth Star Project! Part 2

And I should add that only ONE person has mentioned anything about the King V in that last pic [img]images/icons/grin.gif[/img]
What are you people, blind? [img]graemlins/laugh.gif[/img] [img]graemlins/poke.gif[/img]

Newc