Announcement

Collapse
No announcement yet.

Trying to identify this wood.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Just a thought go down to your local Auto zone and get a gallon of aircraft stripper and try that it will take off the paint with out all that sanding.When the paint has been removed lightly block sand smooth then put on a sealer
    Really? well screw Mark Twain.

    Comment


    • #17
      Originally posted by straycat View Post
      Just a thought go down to your local Auto zone and get a gallon of aircraft stripper and try that it will take off the paint with out all that sanding.When the paint has been removed lightly block sand smooth then put on a sealer


      I did this on my second project. I didnt experience any damage to the wood, though I've heard that paint stripper can do so. It was much faster than sanding, and very effective.

      Later,

      Steve
      Guitars:
      '04 Jackson SL1 - Flametop Cabo Blue Trans Burst
      '94 Charvel Predator - Fire Crackle
      '77 Ibanez LP Custom Copy - Black
      Amp:
      VOX AD30VT

      Comment


      • #18
        You could actually start out with a scraper. It's just a flat piece of metal with a burred edge. It takes off poly paints quite easily, and is very easy to control. It's also much healthier than sanding or chemical strippers.
        Sleep!!, That's where I'm a viking!!

        http://www.myspace.com/grindhouseadtheband

        Comment


        • #19
          OK Guys, I added more photo's, and yes i am getting a scraper tomorrow, even the sander takes awhile and very messy with all that damn dust!

          With the pictures on the left you will see FULL SIZE, click on it and you will see a bigger one.

          Webshots, the best in Desktop Wallpaper, Desktop Backgrounds, and Screen Savers since 1995.

          Comment


          • #20
            where are all my wood experts?

            Comment


            • #21
              I'm gonna have to go with alder. It's a little more red than you normally see basswood, and poplar often has a slight greenish/yellowish tinge.
              Sleep!!, That's where I'm a viking!!

              http://www.myspace.com/grindhouseadtheband

              Comment


              • #22
                Originally posted by zeegler View Post
                I'm gonna have to go with alder. It's a little more red than you normally see basswood, and poplar often has a slight greenish/yellowish tinge.

                +1. The red tone says Alder.
                If only I had back the money I gave that TV preacher....

                Comment


                • #23
                  From the pictures I would tend to lean toward alder. Sometimes it's hard to tell from pictures but here a few more of different varieties of wood.


                  On the Left - Maple, Body on the right Alder


                  Black Limba Blank, the 2 bodies on top are both Swamp Ash


                  Swamp Ash


                  Basswood


                  Alder


                  Mahogany


                  White Limba

                  Comment


                  • #24
                    yeah looks like alder to me too, thanks guys.

                    Comment


                    • #25
                      Id also suggest alder.
                      Custom Guitars, Refinish and restorations.
                      http://www.learnguitars.com

                      Comment

                      Working...
                      X