Someone buy something, I'm bored.

[Death metal soloist]

I need a stealth

[buzzsaww]

Ran guitars is building me a homage to Jeff Hanneman's flacktarn camo ESP does that count?

[RacerX]

Do you have a pic or a rendering of it?

[Robotechnology]

Okay, I'll bite! I just ordered this yesterday:

Model--Hollow Drop Top With Quilted Maple Top/Mahogany Back
Color--Atlantic Storm
Neck--+.030 Even-Taper Satin Finish Indian Rosewood
Fingerboard--Indian Rosewood Fingerboard
Headstock--Reverse Gloss Finish
Nut Width--1 11/16-Inch
Frets--Stainless Steel Jumbos
Pickups--H1/SA2/H3
Switching--5-Way With Master Splitter & Add Bridge Push/Pull
String Gauge--10's
Hardware--Chrome

Now here's where I need some help... the bridge. Sunken Floyd W/ R2 Locking Nut or Vintage Trem With Gotoh Or Grover Locking Tuners? I have it in now as a Sunken Floyd but, I am flip flopping between the 2 bridges. Anybody have a chambered guitar with a Floyd? Have to make my decision by Monday as the neck is going to be made first and the nut needs to be decided! It's not about the tuning stability, it's about the tone but before you immediately say vintage trem... 2 of my 4 favorite guitars tonally are Floyded! Any opinions on this one would be greatly appreciated! Half my guitars are Floyded so keep that in mind as well.

Stay tuned for the frantic spamming that will probably ensue to get back my 85% deposit! The normal 50% went out the window when the dealer saw REVERSE headstock on the spec sheet

[buzzsaww]

Very similar to this pic. I asked him to put slightly more white in the pattern. All mahogany, 24.75 scale length, schaller tune-o-matic instead of the kahler. EMG 81's with the booster circuit, locking tuners, bound neck and headstock, jackson style. The SS will be replaced with lightning bolts but the skulls are staying.

[j2379]

Okay, I'll bite! I just ordered this yesterday:

Model--Hollow Drop Top With Quilted Maple Top/Mahogany Back
Color--Atlantic Storm
Neck--+.030 Even-Taper Satin Finish Indian Rosewood
Fingerboard--Indian Rosewood Fingerboard
Headstock--Reverse Gloss Finish
Nut Width--1 11/16-Inch
Frets--Stainless Steel Jumbos
Pickups--H1/SA2/H3
Switching--5-Way With Master Splitter & Add Bridge Push/Pull
String Gauge--10's
Hardware--Chrome

Now here's where I need some help... the bridge. Sunken Floyd W/ R2 Locking Nut or Vintage Trem With Gotoh Or Grover Locking Tuners? I have it in now as a Sunken Floyd but, I am flip flopping between the 2 bridges. Anybody have a chambered guitar with a Floyd? Have to make my decision by Monday as the neck is going to be made first and the nut needs to be decided! It's not about the tuning stability, it's about the tone but before you immediately say vintage trem... 2 of my 4 favorite guitars tonally are Floyded! Any opinions on this one would be greatly appreciated! Half my guitars are Floyded so keep that in mind as well.

Stay tuned for the frantic spamming that will probably ensue to get back my 85% deposit! The normal 50% went out the window when the dealer saw REVERSE headstock on the spec sheet

sounds sweet, floyds always sound brighter & tighter so its up to you. also V trems sound alot different depending what its made of. i usually find steel vtrems too bright, tho alot of ppl like them. just like brass some guys especially the charvel guys lovem others hate it.

[zeegler]

Damn Ron, that was exactly what I had in mind. That V is sweet as hell. Here's some fuel for the fire. Any excuse to post pics of the Lado.

[toejam]

Well, I bought my Charvel Star back in May. Just got the Tech 21 Trademark 300 head two days ago.

[Sanctuary]

Someone stole a Model 5 and did weird paint on it. :ROTF:

[Accept2]

I just got this fugger...............

http://ca.pg.photos.yahoo.com/ph/[email protected]/detail?.dir=649f&.dnm=4513re2.jpg

[AfterForever]

My latest guitar purchase.. and definitely the coolest V ever made ()



Seriously, these Katanas are extremely underrated. Instant Van Halen sound.. they rock.

[Dave L]

Okay, I'll bite! I just ordered this yesterday:

Model--Hollow Drop Top With Quilted Maple Top/Mahogany Back
Color--Atlantic Storm
Neck--+.030 Even-Taper Satin Finish Indian Rosewood
Fingerboard--Indian Rosewood Fingerboard
Headstock--Reverse Gloss Finish
Nut Width--1 11/16-Inch
Frets--Stainless Steel Jumbos
Pickups--H1/SA2/H3
Switching--5-Way With Master Splitter & Add Bridge Push/Pull
String Gauge--10's
Hardware--Chrome

Now here's where I need some help... the bridge. Sunken Floyd W/ R2 Locking Nut or Vintage Trem With Gotoh Or Grover Locking Tuners? I have it in now as a Sunken Floyd but, I am flip flopping between the 2 bridges. Anybody have a chambered guitar with a Floyd? Have to make my decision by Monday as the neck is going to be made first and the nut needs to be decided! It's not about the tuning stability, it's about the tone but before you immediately say vintage trem... 2 of my 4 favorite guitars tonally are Floyded! Any opinions on this one would be greatly appreciated! Half my guitars are Floyded so keep that in mind as well.

Stay tuned for the frantic spamming that will probably ensue to get back my 85% deposit! The normal 50% went out the window when the dealer saw REVERSE headstock on the spec sheet

This is an Anderson, right? I would have guessed they weren´t taking any new orders after Tom´s announcement a few weeks back.

[Robotechnology]

This is an Anderson, right? I would have guessed they weren´t taking any new orders after Tom´s announcement a few weeks back.

Correct, I had help from Tom's # 1: Roy. He helped me out a lot because he knew I wouldn't find a similar TAG to my specs.

[Superfly]

Robot...Were you at the Ampfest last weekend?

[scaristei]

I have been looking at all of these reallly "strange" shaped guitars and am totally amazed....where do you guys get these things? Where do you play them?