If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
How would you wire this? I got the guitar in pieces, wiring completely off. Two stacked tapped HB's, 1 std 2-wire HB. Space for one pot, one toggle. I like to split the neck HB. Also has five-way blade. Here's a similar model, mine is teal.
take a 5 way schaller megaswitsch, that one automatically splits the neck pup in the "in between" position or take a push pull for splitting both the bridge and neck pup with the standard 5 way
I guess I could use a microswitch. I have no clue how the factory setup was, but I doubt if that mini toggle was setup for coil tap. The pups were tied off on the taps, and the switch only had three poles, not six. The five-way blade is ok, I don't really want to go and replace it.
Thanks, MD....looks like someone removed the original Bridge HB. The original was coil tapped. I'll just move the tap option to the neck.
EDIT: No, wrong, It was a two wire, the diagram says tap, but it looks more like a kill. I wired it up tonight, everything seems good. Now I have to complete the neck repair someone fudged up.
Thanks a million for the diagram. It saved me a ton of time.
Comment