Tweet
OK so I fucked up and didn't diagram very well.
I have a 475 that I am putting the electronics from a beat up one into a not so beat up one. Here's my dilemma:
1. I have 3 black wires that come from each pup cavity and and are soldered to a ground connector tab inside the electronics cavity.
2. Also on that tab, there is a white wire soldered with the three ground wires. I am at a loss as to where that white wire goes.
Can anyone with the 475 or the je1200 setup take a poke inside their guitar and tell me where this goes? Any help would be great. Thanks.
BTW, I am guessing that this wire goes to ground on the middle pot.
__________________
I have a 475 that I am putting the electronics from a beat up one into a not so beat up one. Here's my dilemma:
1. I have 3 black wires that come from each pup cavity and and are soldered to a ground connector tab inside the electronics cavity.
2. Also on that tab, there is a white wire soldered with the three ground wires. I am at a loss as to where that white wire goes.
Can anyone with the 475 or the je1200 setup take a poke inside their guitar and tell me where this goes? Any help would be great. Thanks.
BTW, I am guessing that this wire goes to ground on the middle pot.
__________________