Looking to replace my JT6

[88model2]

would a straight up new OFR do the trick ?

[SausageofPower]

Yep. Quick and easy swap, and worth it IMHO. Love mine.

[Hellbat]

You will need to pay attention to block height when replacing it. Since I believe those were non-recessed you are likely going to need a 37mm or more likely 42mm block on the floyd. If they happen to be recessed you will need a 32 or 37 depending on the depth of the recess.

[88model2]

no recess on the model 2

[GTarman68]

I always dug the JT6, if it is setup correct, it rocks... the wear seems to be the issue.. and cheap machinery .. Cast Vs. Metal

[MakeAJazzNoiseHere]

The 37 mm block worked great on my '88 (no recess) which is what a boxed Floyd comes with anywhere I've ever ordered one.

[SausageofPower]

The 37mm may work, but the 42mm is definitely what the stock block was on the JT-6 (on my Model 4 at least). I just ordered a Big Block from FloydUpgrades and I was good to go.