Model 4 wiring diagram...

[BallsOnParade]

Who's got it?

I want it...

Thank you [img]/images/graemlins/notworthy.gif[/img]

[dg]

Re: Model 4 wiring diagram...

The diagrams from the Tech section show the wiring with a 5-way switch, but they still may help you, at least with the boost circuit.

http://www.jcfonline.com/resources/J.../target19.html

http://www.jcfonline.com/resources/J.../target16.html

For the 3 mini-toggle setup, the white wire (A) goes to the middle lug of each of the toggles in series, starting with the nearest switch then jumpered to each of the others. A white wire goes from the middle lug of the 1st switch to the middle lug of the tone pot. The hot lead from each pickup goes the top lug of its own switch. The switches are grounded in series, then to the common ground. Hope this helps, I know a diagram would be way better.

[dg]

Re: Model 4 wiring diagram...

Looks like where my Model 6 differs from the first diagram is in the routing of the white wire (A) from the board. The diagram shows it going to the tone pot first, but it goes to the switch first on my guitar.

[BallsOnParade]

Re: Model 4 wiring diagram...

do you know if the Volume pot with circuitboard is compatable with EMG's? I've decided that I'm going to throw a set I have lying around in it and wire it like the ones in my Model 6, the j90 in it is noisy as hell right now, where the single coils aren't...

[dg]

Re: Model 4 wiring diagram...

I think you need to take the midboost circuit out & put the 25k EMG pots in if you do that.