Announcement

Collapse
No announcement yet.

Help me pick a set of pups for my Charvel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help me pick a set of pups for my Charvel

    Hello:
    I have a Charvel 375 with a H-S-S configuration. I'm planning to take all of them out including the active electronics and replace them with passive pups. I looking for a good Rock tone i.e., somewhere between Blues and Metal. I already have plenty o' shredders.

    What would you recommend as a set?

    Alf
    www.hermidaaudio.com

  • #2
    Re: Help me pick a set of pups for my Charvel

    Seymour Duncan Quarter Pounder in the neck (flat pole)
    Seymour Duncan Virtual Vintage or a Dimarzio HS-2 in the middle
    Seymour Duncan JB or a Custom Custom in the bridge.
    I also like the Dimarzio Norton, Air Norton or the PAF Pro in the bridge. They all mix very well with stacked singles.

    Comment


    • #3
      Re: Help me pick a set of pups for my Charvel

      For my guitars that have that pickup configuration I went with:

      Neck: Little '59
      Middle: Duckbucker
      Bridge: Distortion

      Neck: Hot Rail
      Middle: Cool Rail
      Bridge: Distortion

      I'm very happy with both setups but like the Rails better.

      Comment


      • #4
        Re: Help me pick a set of pups for my Charvel

        i have the dimarzio "super3" in the bridge, that gives you a very warm tone. a few weeks ago i tested the dimarzio "steve´s spezial" in my 375 and that really sounding like a heavy metal axe! very scooped sound and high output.

        i still use the two stock SCs.

        Comment


        • #5
          Re: Help me pick a set of pups for my Charvel

          My two with that set up are as follows:

          Neck: Hot Rails
          Middle: Cool Rails
          Bridge: Distortion

          Neck: Li'l '59
          Middle: Li'l '59
          Bridge: JB

          The first config is definitely my favorite. It covers rock, shred, metal, and the Cool Rails helps with some nice blues tones also. The second config is more of a straight up rock sound with some nice clean tones as I have all pickups split for single coil use. Either one would be good for what you would want. Also keep in mind a Duncan Custom for the bridge. I put that in my basswood body Ibanez 7-string and with a little bit of tweaking to the adjustable poles, that thing screams!

          Comment


          • #6
            Re: Help me pick a set of pups for my Charvel

            Is there some routing that has to be done to the slots of the single coil positions on the body to fit replacement pups? My model 6 will not fit any replacements( e.g. SD classic stacks) because of the ears at the base of pup being too wide for slot routed in body. What are you guys doing with that? Thanks, Bob

            Comment


            • #7
              Re: Help me pick a set of pups for my Charvel

              I did not have that problem [img]graemlins/scratchhead.gif[/img] it fits perfectly.

              I use different brands of PU's together. In my 6 have this±

              SD lil screamin demon (neck)
              SD lil 59 (middle)
              Dimarzio Steve's Special.

              The lil screamin demon gives a really sweat tone. The lil 59 will be replaced by I don't know what yet (possibly a stack of some brand)
              The SS gives a tight rock tone, it has a lot of output, but it is spread over a wide range of frequencies, so it is not really a high output PU in a traditional way: result: tight rock/metal sound.

              I had the same demands as you have in mind when I choose this config.

              Harrald

              Comment


              • #8
                Re: Help me pick a set of pups for my Charvel

                Hello Harrald, if you look at the base of the lil' screamin demon and the lil' 59, they do not have the traditional base of other standard single coils that have that ear at the bottom where the coil wires are soldered. These type that I'm talkin about will not fit the routed area that fits the J-200 pups or the SD mini humbuckers. Bob

                Comment


                • #9
                  Re: Help me pick a set of pups for my Charvel

                  ok, got the point, you're correct sir! [img]images/icons/smile.gif[/img]

                  Harrald

                  Comment


                  • #10
                    Re: Help me pick a set of pups for my Charvel

                    Originally posted by jeff300:
                    For my guitars that have that pickup configuration I went with:

                    Neck: Little '59
                    Middle: Duckbucker
                    Bridge: Distortion

                    Neck: Hot Rail
                    Middle: Cool Rail
                    Bridge: Distortion

                    I'm very happy with both setups but like the Rails better.
                    <font size="2" face="Verdana, Helvetica, sans-serif">I'm moving towards your 1st setup. I found a Distortion for the bridge and made an offer for a Little '59 in the neck. Thanks for the suggestions!

                    Alf
                    www.hermidaaudio.com

                    Comment


                    • #11
                      Re: Help me pick a set of pups for my Charvel

                      FYI...

                      The 375DLX is passive it is the 475DLX that has the active electronics. (JE1200 preamp)
                      Occupy JCF

                      Comment

                      Working...
                      X