My new MODEL 6 !!!!

[evilnanouk]

...well here it is in MINT ( amazing ) condition:










... i wonder if i would like to do a floyd upgrade / what i could try...you see there is no space to pu an OFR .... so what other "brands" i could try...!!!

[nhspike]

OFR will work
Nice axe

[ZZB]

What spike said.

[shobet]

Very nice, get used to constantly polishing it, I have a black model series and all you have to do is look at it and it gets dirty.

[Da' Melta']

You just won't be able to pull up on the trem when you play it, but the bridge mounting screw spacing for that trem is the same as an OFR.

Here's a 6 that was modified, but has the Floyd trem. They're in alphabetical order by manufacturer. http://jcguitars.com/floyd.htm

[dg]

You just won't be able to pull up on the trem when you play it.

The OFR on my Model 6 pulls up fine. The JT-6 posts do restrict the range slightly, but not much. Budman makes replacement JT-6 posts that have a more open angle to overcome this issue if you find it to be a problem.

http://www.fretsonthenet.com/hardware.htm#JT6_Tremolo_Posts

[wanthairspray]

My M6 with OFR pulls too. And fits the guitar...!

[evilnanouk]

My M6 with OFR pulls too. And fits the guitar...!

does not need "space" to fit? can i have a close photo? thanx

[dg]

What part of the trem are you afraid won't fit? It fits. The post spacing is correct and it's non-recessed, so there's no worry about fitting a recess cavity. Adding an OFR is one of the most common upgrades people do to Model Series Charvels.

[plon]

My Model 6 with Floyd. Just make sure the sustain block is 42 mm.

[kmanick]

I used to have a model 6 with an OFR on it as well (why the fuck did I sell it?)
worked flawlessly man I miss this gutiar.

[Charlz]

What they all said.... it'll fit... got one on mine too...

[AussieTerry84]

i have a Model 6, if i were to get an orig floyd rose, how do i choose the correct one? neva done it b4, r the screws all the same size etc, like will it easily fit into the copies slots?

[wanthairspray]

You'd bascially have to check that the sustain block is the right length and the kinfe edges fit onto the bushings correctly. An OFR should fit those exactly...I think.

[AussieTerry84]

What difference does the OFR make? more sustain when whammying? im intrigued to know