Tweet
Ok here's the story
4 years ago,I bought a used Ps6.But the frets were so bad so I decide to change them, Gave it to a local luthie, but I couln't know that he was just a newbie in his job, and he f.cked the fretboard up =/
After that, I decided to rebuilt this axe according to my pleasure..
Designed some new prototypes from Jcf custom shop which is not usable anymore,these were some of them from that times...
But due to my busy school and life, I had to built it very very slow, which the process took 4 years.OMG !!!!
Bought a new custom Jackson neck from States which is thicker than standart import necks,and vertical to the fretboard 1mm tighter also with mapple fretboard with dots..
Bought X2N for bridge 3 years ago then removed the paint 2 years ago,and bought an air norton for neck 1 month ago... That's before painting...
Also did other major changes on body like...
-changing the back straplock's position,it's now %90 balanced like a regular strat body
-reaching to the switch was a problem for me with kelly and also there was only one knob, no tone! So we opened a new cavity on the lower horn for 3 way switch,to make easy like Dime's or Petrucci's guitar,used the old switch hole for tone pot
Here is the colour I've selected
After painting
And after assembling process (sorry the camera is not so good,couln't show it's real colour, it's like above )
And here with his brothers...
That's my family
4 years ago,I bought a used Ps6.But the frets were so bad so I decide to change them, Gave it to a local luthie, but I couln't know that he was just a newbie in his job, and he f.cked the fretboard up =/
After that, I decided to rebuilt this axe according to my pleasure..
Designed some new prototypes from Jcf custom shop which is not usable anymore,these were some of them from that times...
But due to my busy school and life, I had to built it very very slow, which the process took 4 years.OMG !!!!
Bought a new custom Jackson neck from States which is thicker than standart import necks,and vertical to the fretboard 1mm tighter also with mapple fretboard with dots..
Bought X2N for bridge 3 years ago then removed the paint 2 years ago,and bought an air norton for neck 1 month ago... That's before painting...
Also did other major changes on body like...
-changing the back straplock's position,it's now %90 balanced like a regular strat body
-reaching to the switch was a problem for me with kelly and also there was only one knob, no tone! So we opened a new cavity on the lower horn for 3 way switch,to make easy like Dime's or Petrucci's guitar,used the old switch hole for tone pot
Here is the colour I've selected
After painting
And after assembling process (sorry the camera is not so good,couln't show it's real colour, it's like above )
And here with his brothers...
That's my family
Comment