Hello friends, I come to show my ultra modified DK2 Dinky
The idea was to have a guitar terrifyingly modified but without appearing to, like a Beetle with a Ferrari engine
but the ultimate goal was to make this guitar sound exactly how I like, I think I've achieved
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO2.jpg)
Yes, it is a Jackson Dinky DK2M, originally It had a Maple Neck, but I changed it by one of Rosewood
![](http://i1016.photobucket.com/albums/af281/fheder/DK2Mdinky5.jpg)
I hated the nasal sound and the lack of Sustain that It had, Now sounds more balanced, fuller bass response, greatest Sustain
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO1.jpg)
It has Metal Pickups Rings, fine-threaded studs to make the bridge height adjustment much more precise and Solid Brass knurled bushings
I Replace the original mics for a Gibson 4-conductor Classic '57 on the Neck, and a Seymour Duncan Custom JB-8 on the Bridge, it's a sawing machine!!
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO5.jpg)
The electronics are quite complicated:
*3-way Megaswitch by Schaller to control the pickups position
*two DiMarzio 500kOhm Custom Taper Pot, one with Push/Pull for phase switching (On/Out)
*two Mini Toggle On/On/On Switches, For 3-mode Series/coil-taped/parallel pickup switching
In the middle position and coil tapped It have another Humbucker made of the Inner Coils, that is great because is noise free
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO7.jpg)
What could be better than a Floyd Rose made by Schaller in Germany to keep the tuning perfectly and give that great sustain?
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO6.jpg)
on the reverse side is pure lust:
*KGC 3/4" Thick 42mm long Brass Sustain Block with spring retainer bar
*Gold Plated Springs
*KGC Brass Spring Claw (milled from a solid piece of brass)
*Brass tremolo Stop (when I'm recording in the studio is better to have it fixed, but normally I have it floating)
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO4.jpg)
Sperzel 6-In-Line Non-Graduated Tuners to make the String change very easy and fast, while ensuring a good contact between the strings and the nut due to its low profile
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO3.jpg)
well, that's all friends! I hope you like it!
The idea was to have a guitar terrifyingly modified but without appearing to, like a Beetle with a Ferrari engine
but the ultimate goal was to make this guitar sound exactly how I like, I think I've achieved
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO2.jpg)
Yes, it is a Jackson Dinky DK2M, originally It had a Maple Neck, but I changed it by one of Rosewood
![](http://i1016.photobucket.com/albums/af281/fheder/DK2Mdinky5.jpg)
I hated the nasal sound and the lack of Sustain that It had, Now sounds more balanced, fuller bass response, greatest Sustain
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO1.jpg)
It has Metal Pickups Rings, fine-threaded studs to make the bridge height adjustment much more precise and Solid Brass knurled bushings
I Replace the original mics for a Gibson 4-conductor Classic '57 on the Neck, and a Seymour Duncan Custom JB-8 on the Bridge, it's a sawing machine!!
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO5.jpg)
The electronics are quite complicated:
*3-way Megaswitch by Schaller to control the pickups position
*two DiMarzio 500kOhm Custom Taper Pot, one with Push/Pull for phase switching (On/Out)
*two Mini Toggle On/On/On Switches, For 3-mode Series/coil-taped/parallel pickup switching
In the middle position and coil tapped It have another Humbucker made of the Inner Coils, that is great because is noise free
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO7.jpg)
What could be better than a Floyd Rose made by Schaller in Germany to keep the tuning perfectly and give that great sustain?
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO6.jpg)
on the reverse side is pure lust:
*KGC 3/4" Thick 42mm long Brass Sustain Block with spring retainer bar
*Gold Plated Springs
*KGC Brass Spring Claw (milled from a solid piece of brass)
*Brass tremolo Stop (when I'm recording in the studio is better to have it fixed, but normally I have it floating)
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO4.jpg)
Sperzel 6-In-Line Non-Graduated Tuners to make the String change very easy and fast, while ensuring a good contact between the strings and the nut due to its low profile
![](http://i1016.photobucket.com/albums/af281/fheder/WhiteJacksonDK2DinkyPRO3.jpg)
well, that's all friends! I hope you like it!
Comment