ordered an SL27EX

[wilkinsi]

As much as I want to put a real OFR in there, unfortunately, there are crackheads wanting ridiculous amounts of money for a brand new OFR, so I am only looking to potentially replace the sustain block.

[ed]

Usually Jackson uses 32mm blocks but you want to check it before getting a new one.The sizes are 42mm and then 37 or isit 36 and then 32mm. Also Kiesel funnily have their own size too its 38mm if i recall.
Also yes OFR parts are compatible with 1000 series as is the sustain block for schaller trems the original and the lockmeister. But Gotoh 1996 is not.
As a side note Gotoh 1996 block is compatible with the ibanez Edge trem.

[wilkinsi]

As much as I want to put a real OFR in there, unfortunately, there are crackheads wanting ridiculous amounts of money for a brand new OFR, so I am only looking to potentially replace the sustain block.

[wilkinsi]

https://ibb.co/XDD7cbb

https://ibb.co/p18QZQL

https://ibb.co/tK22LkY

https://ibb.co/KzK5S1S?

[wilkinsi]

Think this SL27EX needs rewiring and jack socket replacing. bit on the noisy side. If and when Floyd Rose restock the OFR in black, I'll swap out my FRT-1000, swap the output jack and swap the SH-6 for an SH-8 (in yellow of course).

[metalhobo]

I dunno about the invader but sure don't like the duncan distortion either.

you could try contact cleaner or deoxit on the jack. not necessarily cheaper than a new jack, but less work. spray some in, then insert and remove a guitar cable several times.

[wilkinsi]

not a bad idea. thanks