Anyone have a picture of the control panel in a Dominion?

[I Am Odin]

Anyone have a pic of what one looks like clean on the inside? I have one that I got about a year ago off ebay and I thought it was all good until this past week when my bridge pup goes out now and again and all I get is neck (even when the selector is set in the bridge position). Seems to happen when also when I adjust the bridge tone knob.

I open her up for the first time today (DUMB I know! - in hindsight I should have done this when I bought her) and the wire coming from the pu selector looks like it has a "wrap" (not electrical tape though) over part of it.

Just trying to troubleshoot before I take it to a shop. I was going to get the bridge 59 swapped out for an Invader at a shop anyway so hopefully that would fix the problem?

Thanks in advance for any advice or help.

[Newc]

Could be the 3-way. Check the metal tabs to be sure they're making good contact. I had an import that was like that. All I had to do was bend the tab back in place and it's been flawless ever since.

[Spivonious]

+1 Even if the switch does turn out to be bad, you can get a nice replacement for under $15.

[toejam]

Don't know if this will help, but here's a pic of mine.

[I Am Odin]

I think I fixed the problem... looked like a metal tab on one of the tone pots was touching the control for another pickup ?? or it hasnt happened since I bent the metal tab away.

Thanks to all!