problem with the bridge of my King V pro

[Disease75]

Hi guys !
I have a sweet King V pro Mustaine , it's really a great guitar with a killer tone and I love to play it very much.
I have a little problem with the action , I see that regulation on the Kahler fixed bridge is too small for all type of wrench in my stock , do you know the right one for the regulation ?
Thanks a lot !!
F.

[Newc]

Nope. I think they're SAE (non Metric) though. Take off the bridge and take it down to a hardware store and try different hex wrench sets until you find the right one.

[Disease75]

Thank you !!!

[Axewielder]

I have the later version of that bridge (the 7330), and the saddle height screws take a .05" wrench. I'm sure yours is the same.

[Mazz]

Pics please?

[Brooke]

I have the later version of that bridge (the 7330), and the saddle height screws take a .05" wrench. I'm sure yours is the same.

I concur .05 I had to buy an expensive set just to get the precious .05.

If you sneeze you loose it.

[Axewielder]

I concur .05 I had to buy an expensive set just to get the precious .05.

If you sneeze you loose it.

You're not kidding. Also, I don't think you'll find that size on one of those standard SAE allen key folding all-in-one jobs.

[The Mitch]

I remember when I bought about 5 different wrenches and none was the right size

[Disease75]

thank you for the infos , I hope to find the 05" !!