Help me please!!!pure emergency for a 1990 usa warrior!!!

[nicobituary]

I disassembled the guitar to repaint and now I can not mount the electronic. where can I find the scheme for 3 Kent Armstrong rail active single coil,5 position switch,the JE-1500,one tone and one volume control??please help me!!!THANK YOUUUUUUUUUUUUU!!!!!!!

[PowerTube]

Kent Armstrong Wiring Schematics

[nicobituary]

thank you!!!but how can i link the je1500???

[charvel750]

Right, a diagram showing the leads of Armstrongs isn't going to do squat. That is a complex wiring job with the Jackson 5 way "Super Switch." I will open up my Warrior and let you know. Simon also has an originally wired Warrior with that switching system. Again, very complex and tricky. I'll get you a pic and directions soon.

[Newc]

The Special 5-Way can do all sorts of neat tricks, but what you'll proabably want is:

1 Bridge1+Bridge2
2 Bridge2
3 Bridge2+Neck
4 Neck Split
5 Neck

Though personally I'd go for:

1 Bridge1+Bridge2
2 Bridge1&2 split and in series (otherwise known as coil swap where you use the rear coil of one and the front coil of the other)
3 All 3 in parallel in series with each other (6 individual coils going off at once, and hum-cancelling)
4 Neck split (for the chinka-chinka)
5 Neck


Wiring the board is easy - where the KA diagram shows going from the switch to the knobs, go to the board's knobs, then the board output to the jack.

[TheShadow]

Just curious why you wouldn't have taken detailed pics and written out a diagram before you disassembled...?

[nicobituary]

Thank you SOOOO much!!! when could you show me your photos or schemes?? I'm frying out ......

[nicobituary]

charvel 750 you have a private message,bye!

[nicobituary]

Charvel 750 please help meeeeeeeeeeeeeeee!!!thank you!!!