What would be your dream Jackson Custom ?

[Disturbing Manor]

Green quilt-topped Vinnie Vincent with black "extra" wings, black back & neck
-reverse headstock
-black hardware
-bound ebony board with reverse abalone sharkies
-24 frets
-recessed OFR
-standard RR1 toggle switch & single volume knob
-pickups...undecided, but 2, and high output
-wood = same as standard RR1

Damn, now I'm gassing for a guitar that will never happen! Why did I click on this thread!

[loki: god of chaos]

King Kelly,
mahogany,
Satin black,
neck though 5 peice walnut/maple ibanez spec neck, 25.5" scale, 24 MJ Frets, abalone sharkies,Ebony Fretboard w/ white binding,
satin neck,
Ibanez Edge Pro Tremolo,
Black Nickle Hardware
Emg 81,bridge, SA middle. 60 neck, 18v
2Vol., 1 Tone, PA2 mini toggle, 3 way toggle on top horn like gibson explorer
Grover tuners,
Floyd Rose Locking Nut,
Matching Headstock
Abalone Logo
strat style input jack
and thats my dream cs guitar

[The Rossness]

Model: Death Angel or Death Kelly
Body Woods: Rosewood neck and center, alder wings, 3/4 inch Basswood top,
Neck: Rosewood Neck, Lynch neck profile, 5A Birdseye maple fingerboard, stainless steel jumbo frets, fully scalloped, 23 frets, exotic car inlays, Vigier locking tuners, Tele headstock, 25" scale
Pickups: Overwound Seymour Duncan Custom Custom [A8] in the bridge, Seymour Duncan Classic Stack in the middle, Dimarzio PAF Pro in the neck, Roland GK synth pup
Controls: Volume, Tone, Treble bleed, 3 way blade PU selector switch, on/off mini switch for middle pup, Active tone control, 2 9-volt batteries
Finish: Old school spider web graphic updated to modern standards- The spider webs are fiber optic light strips imbedded into the top of the guitar. They randomly change color. The guitar is a pale green glow in the dark.
Bridge: Ibanez Edge Zero or Edge Pro, gold, Top Mounted

[Nagash02]

@ Loki & Ross... weird !

[jim777]

This is going to sound weak, but a Nebula SL1 with maybe Saturn inlays in the board would work for me

[vector]

Might not count... Already ordered it. Not technically a "Jackson" per se but it's coming from the Jackson Charvel CS- ya know? Same-same. Alder Star body, bolt-on maple neck, scalloped heel, dark rosewood neck, 24 jumbo frets, sharkies, reverse headstock, 2 SD active Blackouts, 3 way toggle, 1 volume, recessed OFR, red rising sun on black background, red logo. Ahhhh...

[markD]

a PC-1 with a reverse sears headstock, rosewood neck and fretboard, no middle pickup, an HS-3 in the neck position, an SD JB in the bridge, gold hardware, finished in solar.

a PC-1 with a reverse sears headstock, maple neck, quilted fretboard, no middle pickup, an SD JB in the bridge and a '59 in the neck, gold hardware, finished in holoflake.

original PC archtop with a reverse pointy headstock, ebony fretboard, abalone crop circle inlays, twin direct mount humbuckers (angled neck humbucker), black hardware, finished in white.

[Devotee]

Jackson Slimecaster:

Model/construction: 25.5" scale neckthrough Archtop Telecaster.
Wood: Mahogany neck and wings, AAA quilted maple cap.
Neck: Ultra-thin profile, 24-fret ebony fretboard with MOP biohazard sign inlays and stainless steel Jumbo frets, last few frets are slanted to follow neck pickup. Reverse headstock!
Finish: Metallic/pearl neon/toxic green/black burst, matching headstock with MOP Jackson logo on top, multiply white/black binding around body, neck and headstock. Back of guitar painted black. Black hardware.
Pickups: Seymour Duncan Invader in the bridge, Hot Rails slanted clockwise in the neck. No pickup bezels.
Control layout: Single volume knob, three-way selector switch on the upper right of guitar body (similar to an LP).
Hardware colour: black.
Bridge: TOM string-through body.
Nut: 1-5/8" Graphite.
Machineheads: Sperzel locking tuners.

Ultimate Badass Black Baritone RR24:

Model/construction: 27" scale neckthrough RR.
Wood: Maple neck, alder wings.
Neck: Ultra-thin profile, 24-fret ebony fretboard, no inlays and stainless steel Jumbo frets. Reverse headstock!
Finish: Satin black with gloss black bevels. Matching headstock with Jackson logo in gloss black.
Pickups: EMG 81 or Bare Knuckle Warpig
Control layout: Single volume knob.
Hardware colour: (Yep) black.
Bridge: Recessed OFR.
Nut: 1-1/16" Floyd locking nut.
Machineheads: Sperzel locking tuners.

[Grim]

My next custom is going to be a lean and mean Charvel or GMW.

Ash body, maple neck, maple fingerboard, flame maple top, trans-red, H/S or H/S/S config, gold hardware, Fender Hardtail bridge, MOP/Abalone dot inlays, matching headstock w/ gold tuners.

[VitaminG]

you remember the old Charvel ads where Grover explained how the compound radius was like a section out of a cone? I want to extend the concept to the whole guitar. So the entire guitar looks like a section of a cone.

Of course, then you won't be able to swap neck and bridge pickups because they'd be radiused differently....

[DarkkWarriorr]

If money isn't an issue:

1) A double neck/reversed headstocks Warrior with all the goodies (Killer paint-job, Floyd, Bound Ebonies with Sharkies... etc) with this configurations:
a) Upper warrior: Seven strings with one Pick-up.
b) Lower Warrior: Six strings with H-S PUs, where the S pickup is a sustainer.

2) Mahogany TBK Death Angle with quilted maple top, bound ebony revered headstock with Scythes inlays and one PU.

3) All the WR1 Warrios with reversed headstocks I can afford.

[ToneZone]

I have two dreamguitars I'd like to have built sometime in the future:

1.
NASL design
Neckthrough
Body and neck in Mahogany
Quilt Maple top
Ebony fretboard
22 Jumbo Frets
MOP custom inlays (Band-logo or something)
Binding around neck and headstock
MOP Logo
Transgreen finish with matching headstock
Dimarzio AirNorton (N) and Tonezone (B)
Fishman Piezo TOM Bridge
Two outputjacks (One for magnetic P.U., one for Piezo)
Controls: Magnetic Volume and Tone, 5-way switch with coil-tap on position 2 & 4
Small 3-way (Magnetic - Both - Piezo), Volume (Piezo)
Goldplated hardware

2.
SLS-design 8 string
AT-headstock with 4+4
Neckthrough
Mahogany neck and body
Maple fretboard
24 Jumbo frets
Ebony Custom inlays
Black binding on body, neck and headstock
EMG-808 in neck and bridge
Three way switch and volume
Kahler 2328 Tremolo
Goldplated Hardware
Snowwhite finish with matching headstock

[Twitch]

I think Id definitely have my 96 Kelly Pro immortalized in USA Custom Shop stone.

Kelly body
Quilt maple top 1/4 in.
Trans Blue/Green
Same Silver glitter logo
Exact same neck profile (definitely a make or break, would send it back if they got it wrong)
Contoured heal
Reverse Sharkies
Ebony board
Standard direction headstock
Black hardware
HB103 bridge (yes I prefer the sound of the DD thats in it)
Anything for the neck p/u
Dunlop strap locks
Either Schaller or Sperzell tuners
Cream neck and headstock binding (my Pro does not have this)
Bolt-on ( for 2 reasons, 1. Im sure theyd probly fuck the neck profile at least once before completion, 2. If the neck goes bad, the body doesnt go with it)
Black Hardware, standard FR

Another option would be a totally custom Kelly based off of my DKMGTFF

Solid gloss Black, no bevels, cream binding that wraps onto the top and sides
Reverse headstock
My Kelly Pros neck profile (again, same deal as above)
Contoured heal
Ebony board
Flame fretboard inlays like the DKMGTFF
Cream neck and headstock binding
HB103 bridge
Again, anything in the neck
Schaller or Sperzel tuners
String through
Black hardware
Cream colored Jackson logo (not big on the MOP logos)
Bolt-on

Thats pretty much it. Would be tickled pink if either one of these would reach fruition.

[Robert Hendrix]

Hmm, I've been thinking about this and this is what I've come up with.
Soloist neck thru (HSS), Mohogany body, with a nice quilt top (trans blue) Ebony board (No inlays) reverse pointy (w/pearl logo inlay) and for the pickups... Tone Zone in the bridge, Hot rail in the middle and a sustainer (ala Pc1) in the neck. I'd be totally happy with either black or gold hardware, but not chrome.

EDIT: Oh yeah, almost forgot the OFR. I'm on the fence about it. I'd kinda like a non recessed floyd with a drop tuner, but I'm not sure I'd like it or use it so, o that point, I'm still a little fuzzy.

[guitardudeluke]

jcf rr vw block inlay.jpgjcf rr white.jpg
either one of them two