Hi, new (old) guy checking in, just took delivery of a 2011 Chlorine PC1, bought used on eBay. Beautiful guitar, dead mint...but I have a problem with squealing/whistling when I toggle harmonic mode on the sustainer. Going to search through here and see if there's any posted solutions...any PC1 owners have any tips for me as I get comfortable with this beauty, I surely appreciate it! Look forward to hanging out and contributing where I can!
Announcement
Collapse
No announcement yet.
New member, new PC1
Collapse
X
-
Sounds like someone (previous owner perhaps) has been playing with the trim pots on the sustianer board.
There are two of them and you needs a small plastic phillips head screw driver to adjust them.
There's a process to resetting the board, but you need to be comfortable with opening the guitar up and adjusting it.
You basically mark their current position with a fine tip sharpie for reference and then center both trim pots and then adjust from there while the guitar is plugged in.
Flip between normal and harmonic sustain modes while adjusting until the squealing is gone.-Rick
Comment
-
Here she is...I'll do some glamour shots later
The other thing the previous owner did was swap the Super 3 for a Tremonti pickup...I'll probably put it back to stock, not that I hate the Tremonti, but it's a standard 50mm spacing and the pole alignment is a little off, so I'm probably not getting everything I can get out of it anyways.
Thanks for the tip Rick, I'll open it up and take a look this weekend, hopefully I can dial it in because I really love the effect!
Comment
Comment