85 San dimas Rhoads wiring question

[schofnsteen]

I recently acquired an 85 San dimas Rhoads. Would the neck volume normally be wired to the volume closest to the bridge pickup? the guitar is wired from front to back :Neck volume, bridge volume,tone. 3 way toggle. I prefer bridge ,neck tone. Can I just swap wires on pots around?

[toejam]

Yes, that sounds right. You can wire it any way you wish, though, and should be able to just swap the wires.

[BLOOD SPLATTER]

Yup standard Rhoads wiring is Neck Hum Volume - Bridge Hum Volume - Tone

[msaint65]

Not sure how the capacitor on the tone pot will be affected.....if there is enough slack in the wiring you may physically be able to swap pot locations - but that would be to easy so I'm not betting on it .