Tweet
Any you guys know what size truss rod wrench I’ll need for an 88’ USA Jackson dinky? Thanks in advance
-
-
3/16Originally posted by Pjc007 View PostI know the old saying that the value of an opinion is generally inversely proportional to the strength with which it is held. -
Hey John looks bigger than that mate. Tried a 1/4” socket on it and seems to fit but it’s too bulky to get in the cavity all the way so I’ll order a proper 1/4” truss rod tool. ThanksOriginally posted by john.w.lawson View PostComment
-
Oh, it's a 7mm pipe truss wrench.Originally posted by Pjc007 View Post
20230112_055555_HDR[1].jpg
here's some links on ebay
I know the old saying that the value of an opinion is generally inversely proportional to the strength with which it is held.Comment
-
No, I have a 7mm wrench (exactly like the one pictured) that I tried on it and it’s sloppy! It’s a 1/4” I’m sure now after trying the socket on it.Originally posted by john.w.lawson View PostComment
-
There's a set listed of three different sizes on that ebay page. USA's older J/C model vary, my 86 takes a 3/16 allen wrench so does my 98 soloistOriginally posted by Pjc007 View PostI know the old saying that the value of an opinion is generally inversely proportional to the strength with which it is held.Comment
-
Thanks, I was able to order a 1/4” locally. I already have a 5/16 and 7mm for my Les Paul’s and old 80’s Charvel. Should have all bases covered nowOriginally posted by john.w.lawson View Post
Comment
Comment