86' San Dimas Jackson

[ErikSmith]

please e-mail me to get the picture [email protected] ...i have no clue on how to put i on the website....its a pink and black bengal finish... serial#1953 its was made is San Dimas, CA thats about all i know about it...my buddy from the guitar shop said its worth around $1500 - $2000 so i'd like to know more

[xenophobe]

Re: 86\' San Dimas Jackson

Anything with a serial number of #1505 and higher would be manufactured at the Ontario, Ca plant, regardless of what the neck plate says.

In dead mint condition, it's worth between $450-$800.

If it's got sharkfins, ebony board, or custom configuration, like a Original Floyd Rose, or one hum setup, it'll pull higher... If it's a standard h/s/s with a kahler, it would be lower...

[Jim Shine]

Re: 86\' San Dimas Jackson

I myself just learned the whole neck plate address doesn't mean squat lesson a month ago on a Jackson I bought.

[ErikSmith]

Re: 86\' San Dimas Jackson

It has a kahler trem, 2 hum, 5-way pickup selector, sharkfin inlays, and the neck-plate says.. i tried to make it look like a neckplate...
____________________________
!--+---------------------+ !
!-----------tm-------------!
!-----Jackson--------------!
!--------Made in the USA---!
!--------------------------!
!--------1953--------------!
!--------------------------!
!----- PO Box 245----------!
!----- San Dimas ----------!
!----- CA 91773 -----------!
!----- U.S.A. ------------!
!--------------------------!
!--+---------------------+ !
!__________________________!

[xenophobe]

Re: 86\' San Dimas Jackson

It's probably worth $450-$700.

Like I said, any serial number #1505 or later, is made at the Ontario plant, as they had a lot left over before the move in mid-86,

I just bought one below, it doesn't have sharkfin inlays, but it has a factory Floyd. I paid $450 for it, and it's as close to dead mint as they come...

Here's the auction:
http://cgi.ebay.com/ws/eBayISAPI.dll...=2505605754ing