Re-installing the original electronics of a USA Fusion

[max]

At some point I ripped out the entire electronics of my USA Fusion and now I want to put it in again.

I have 4 loose wires and I don't know where they go:

1. a red wire coming from the battery thing
2. a black wire that I don't know wether it belongs to the battery or the input jack
3. a white wire from the input jack and
4. a white wire coming from the circuit board (directly next to the poti).

Any help would be greatly appreciated.

[dg]

Here's the diagram for the JE-1500:

http://audiozone.dk/cm/displayimage.php?pid=490&fullsize=1

[Model 88]

I can take some pictures if you want .

[max]

Here's the diagram for the JE-1500:

http://audiozone.dk/cm/displayimage....490&fullsize=1

OMG, the loose wires all go to the circuit board

[dg]

There are some tips here for soldering to circuit boards:

http://www.instructables.com/id/EA0BG5C8JWEWP873MU/

[max]

Thanks everybody. I actually got it to work...at least the humbucker is working with wah and no noise and everything, so that part of the problem is solved. I only installed one siglecoil yet and its dead silent. Have to check and see whats wrong.

I actually feel inspired to install the mid-boost from my old model 4 somewhere. That one is even more fucked up. The mid-boost sounded decent if I remeber correctly.