Announcement

Collapse
No announcement yet.

Converting a Morton MM1 to a 12-string

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Converting a Morton MM1 to a 12-string

    Not interested in whether or not anyone thinks it's a good idea, I'm only looking for ideas on where to get the hardware to do it.

    So far I've found a Schaller 12-string TOM that is reputed to replace a 6-string without mods, so all I need is a stopbar with 12 holes and 6 tuners and that headstock clamp Jackson uses on 12-string Soloists.

    Any ideas?
    I want to depart this world the same way I arrived; screaming and covered in someone else's blood

    The most human thing we can do is comfort the afflicted and afflict the comfortable.

    My Blog: http://newcenstein.com

  • #2
    Personally, I think it's kind of a cool idea if done well. I'd think about looking for a piezo bridge if you can find one.

    12 string stop: http://www.allparts.com/12-String-St...p-5440-010.htm

    Beyond that, the main thing I suggest is to do a little research to ensure that you can get 12 strings without a 1 3/4 nut width. Not saying that 1 3/4 is the standard 12 string width, but I'd hate to go through the process to find that out later.

    Sully
    Sully Guitars - Built by Rock & Roll
    Sully Guitars on Facebook
    Sully Guitars on Google+
    Sully Guitars on Tumblr

    Comment


    • #3
      There is a Jackson Rhoads custom shop on egay that claims to have a 1 11/16 nut on the end. They even go to say that its made out of brass.
      Chris

      Is there any other brand of guitar...?

      My fleet of guitars
      http://www.angelfire.com/va2/ckjones

      Comment


      • #4
        Originally posted by Newc View Post
        Not interested in whether or not anyone thinks it's a good idea,...
        Wait!, that's not a good idea! j/k

        I think it's cool as hell. Any idea on where to place the other 6 tuners? I always thought about converting a bolt-on charvel model series neck to a 12-stg, but haven't (yet) done anything. I don't even know if those necks can support a 12 stg's tension. I'm assuming it about twice as much tension on the neck as a 6, right?
        "Your work is ingenius…it’s quality work….and there are simply too many notes…that’s all, just cut a few, and it’ll be perfect."

        Comment


        • #5
          Just seeing the thread title, I knew it was from Newc! :ROTF: Sounds like a neat idea, Matt.
          I feel my soul go cold... only the dead are smiling.

          Comment


          • #6
            Sully - Oddly, I already have the piezo 6-string bridge - the LR Baggs from StewMac. Sounds nice through the GFS CMP-1 compressor, not so nice without it

            Allparts has an ABM 12-string TOM. Someone at the SD forum mentioned the Schaller bridge, but I couldn't find it on their site. Probably have to cut the slots on a 6-string TOM to get it, which would allow me to customize the string spacing, I guess. Hmmmm.


            As for the other 6 tuners, I'm thinking some sort of modded tailpiece with high ratio tuners (ala LSR) or a Speedloader setup with balls on both ends.

            So my next problem to be solved is a clamp I can mount to the headstock for the 7-12.
            I want to depart this world the same way I arrived; screaming and covered in someone else's blood

            The most human thing we can do is comfort the afflicted and afflict the comfortable.

            My Blog: http://newcenstein.com

            Comment


            • #7
              Are you gonna splat red paint and whack metal studs into it too?
              Fuck ebay, fuck paypal

              "Finger on the trigger, back against the wall. Counting rounds and voices, not enough to kill them all" (Ihsahn).

              Comment


              • #8
                gurr hurr hurr hurr

                Actually........





                ....I do have another WRMG-M I have been thinking about Halfordizing, but without the paint this time.
                I want to depart this world the same way I arrived; screaming and covered in someone else's blood

                The most human thing we can do is comfort the afflicted and afflict the comfortable.

                My Blog: http://newcenstein.com

                Comment


                • #9
                  Originally posted by sully View Post
                  Personally, I think it's kind of a cool idea if done well.
                  See, that's the problem...it's Newc we're talking about here!

                  Seriously, cool idea Matty...hopefully everything works out for you. The Dominion is the perfect body to do something like this. If everything falls into place, it should sound amazing.

                  Comment


                  • #10
                    Maybe you could mount the extra six tuners behind the original bridge and stop tailpiece - I don't know the set-up on the Morton but I thought it had the stop tail.

                    Anyway... with the design of these tuners from stewmac (http://www.stewmac.com/shop/Tuners/G...ss_Tuners.html), it would be an easy modification to mount these "Banjo" type tuners - straight holes (of various diameters through the body). Then maybe mount a Floyd Locking nut behind the nut that is on there right now to lock the additional six strings.

                    Sounds Do-Able. Adding duct tape (call it Alabama chrome if you want to add some class) somewhere into the design will surely up the success rate.

                    Comment


                    • #11
                      Alabama Chrome

                      Yeah some sort of trapeze-shaped tailpiece on the stopbar posts with banjo tuners would look nice.
                      Art-Deco-type staggered shape, like a D'Angelico or something.

                      Maybe something like this modded for tuning.
                      Allparts® Music Corporation is the world's leading distributor of guitar and bass parts to retailers, builders, techs, and guitar players.


                      Or something like a Sho-Bud pedal steel tuning section.
                      Last edited by Newc; 06-20-2010, 03:55 PM.
                      I want to depart this world the same way I arrived; screaming and covered in someone else's blood

                      The most human thing we can do is comfort the afflicted and afflict the comfortable.

                      My Blog: http://newcenstein.com

                      Comment


                      • #12
                        Originally posted by ulijdavid View Post
                        Anyway... with the design of these tuners from stewmac (http://www.stewmac.com/shop/Tuners/G...ss_Tuners.html), it would be an easy modification to mount these "Banjo" type tuners - straight holes (of various diameters through the body). Then maybe mount a Floyd Locking nut behind the nut that is on there right now to lock the additional six strings.
                        Those steinberger gearless tuners would be pretty slick. You'd have to route out some wood out of the back though since the widest headstock it'd take is 16.89 mm (according to the spec sheet). Same ratio tuning as LSRs, 40:1!
                        "Your work is ingenius…it’s quality work….and there are simply too many notes…that’s all, just cut a few, and it’ll be perfect."

                        Comment

                        Working...
                        X