Tweet
Guys just wanted to say I saw a thread on here that said to use a tooth pick.
So I did.
Just measured it a little shorter than the whole and it worked great.
So I did.
Just measured it a little shorter than the whole and it worked great.
-
PLAY TILL U DIE !!!
-
Tip: Put the screw in while the glue is still wet. Unless you are using CA... Then don't do that.
-
I use wood glue. You can use superglue, but make damn sure none gets near the finish! Ask me how I know that..._________________________________________________
"Artists should be free to spend their days mastering their craft so that working people can toil away in a more beautiful world."
- Ken MComment
-
I'll also drop some water thin CA glue into older strap button holes and bolt on neck holes. It helps the screws gain some bite.
SullyComment
-
I have found with injecting the stripped hole with wood filler and letting it dry w/ no screw in it, then drilling a small pilot hole and gently threading in the screw works pretty good. I think it Elmers makes those long nozzle wood filler. Works fine for me!Chris
Is there any other brand of guitar...?
My fleet of guitars
http://www.angelfire.com/va2/ckjonesComment
Comment