Announcement

Collapse
No announcement yet.

trem bushing help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • trem bushing help please

    I got a body off ebay and there were bushings but no posts. Guy said it was ofr bushings. I thought an ofr wasnt a direct replacement for a jt580lp, but any way how do i remove the bushings without a post? I tried other posts i had layin around but theu just fall right into the hole:think:

  • #2
    Try finding metric screws.

    Comment


    • #3
      I've seen some JT580LP guitars with posts that were pretty much Floyd posts, and others that are not. My SL2 was, my Fusion HH was not.

      You could probably just get a bolt, maybe take it to the HW store and find a metric bolt that fits. But the bigger ones are JT6 bushings... Maybe it was a Jackson with a Floyd on JT6 posts? They did that IIRC.

      Comment


      • #4
        Its a dkmg body. Yeah i guess ill just unbolt the neck and take it to the hw shop. I almost had it completely finished too dammit all. Guess i shoulda checked the trem posts first.

        Comment


        • #5
          You could pull the installed bushings, and install a new matching set of posts/bushings.
          _______________________
          semi-automatic hate machine...

          Comment


          • #6
            Originally posted by GuerillaPete View Post
            You could pull the installed bushings, and install a new matching set of posts/bushings.
            I believe that's what he's trying to do; he's just finding it difficult without something to thread into the bushings that will bite so he can pull them.
            My Gear: Stoneman SG-1, Hufschmid Tantalum H6, ESP KH-6, Sully #8 JCF One-Off, Templar GuitarWorks Relic Prototype, James Hetfield Tribal Hunt KL Explorer, Coobeetsa CCG-10-DX PRO Eagle, Schecter Hellraiser C-1 Hybrid, Daly Heiro Custom, Gibson Les Paul Custom, Gibson SG Menace, Peavey Vypyr 60 Tube

            "You are dog shit in my shoe." -Newc

            Comment


            • #7
              I hate when sellers strip a body like that. If you have the posts, include them. If not, say so in the listing so people can avoid it.

              That said, good luck finding replacements at the big parts houses like StewMac. I've yet to find exact replacements. If all else fails, drill a small hole in the back of the body (1/8") and drive them out the top with a 1/8" pin punch (if you can find one locally).
              I want to depart this world the same way I arrived; screaming and covered in someone else's blood

              The most human thing we can do is comfort the afflicted and afflict the comfortable.

              My Blog: http://newcenstein.com

              Comment


              • #8
                Originally posted by DalyTek View Post
                I believe that's what he's trying to do; he's just finding it difficult without something to thread into the bushings that will bite so he can pull them.
                I know StewMac sells one. It's like $45USD. Comes with a set of screws/bolts. Might be steep for a one time thing. If I knew it was going to be a one-time thing, I'd buy it, use it and then re-sell it on to someone else.


                But I think somewhere on here, there was a thread where a dude made his own bushing-puller.
                _______________________
                semi-automatic hate machine...

                Comment


                • #9
                  Just go to the hardware store, find the right thread bolt or screw longer than the bushing, screw it in, and when it bottoms out in the hole it will push the bushing up and out.
                  METAL, LIVE IT!

                  Comment


                  • #10
                    Originally posted by jacksonaxes View Post
                    Just go to the hardware store, find the right thread bolt or screw longer than the bushing, screw it in, and when it bottoms out in the hole it will push the bushing up and out.
                    That's how I do it. Or, I use the stud and something that fits very closely to the ID of the bushing but won't bind in the threads. Unless I don't care about the body, then I pull it from the top with a claw hammer.

                    Comment


                    • #11
                      Originally posted by jacksonaxes View Post
                      Just go to the hardware store, find the right thread bolt or screw longer than the bushing, screw it in, and when it bottoms out in the hole it will push the bushing up and out.
                      Being metric, it might be hard to find the right threading at a local hardware store. You'd have to take the guitar with you, which may not be entirely practical.
                      I want to depart this world the same way I arrived; screaming and covered in someone else's blood

                      The most human thing we can do is comfort the afflicted and afflict the comfortable.

                      My Blog: http://newcenstein.com

                      Comment

                      Working...
                      X