Project

[sammyboy162]

Hi, im building Project using a charvel body, I've used Dimazio pickups and im coil tapping them with a push pull so that the bridge humbucker taps into a single, will this sound ok? also im using a jackson shark fin neck which im getting a bone nut cut. but ive just noticed the bridge iv bought doesn't line up with the neck right. ok so my thoughts were its vintage spaced but then i checked and my bridge is vintage spaced? im trying t find out (A) what sould be bridge size be if im using a jackson shark fin neck and (b) is there a diffence in scale between fender and gibson bridges in scale because i think my trem is made to gibson specs whch might be the reson its to fat at the ends. thanks x

[sammyboy162]

my project so far..



[IMG]<a href="http://s988.photobucket.com/albums/af9/sammyboy162/photo/guitar/?action=view&amp;current=charvelpic.jpg" target="_blank"><img src="http://i988.photobucket.com/albums/af9/sammyboy162/photo/guitar/charvelpic.jpg" border="0" alt="Photobucket"></a>[/IMG]



obviously that bridge isnt going on.. my problem is though i need a trem that fits and not a floyd rose? any ideas?

[RampantLion]

I believe you'd need to route it for any type of real tremolo