Hi,
I'm about to change my tone pot for a push pull one, in order to fit in a set of Bareknuckes on a SL2H and split the coils of both neck and bridge pick up, and do not know what pot to buy.
After searching the web for suitable ones, I see there is a variety of measures and I wouldn't like to work on the wood, just to swap the pots and soldering. I guess shaft diameter (to adjust to the original hole ) and length of the pot (to fit in the cavity) are the important dimensions to take into consideration but I'm somehow lost.
Perhaps is a silly question but the Soloist is the best guitar I'll ever have (my wife will not allow such an expense never again
) and would like to keep it in the best condition!
many thanks
I'm about to change my tone pot for a push pull one, in order to fit in a set of Bareknuckes on a SL2H and split the coils of both neck and bridge pick up, and do not know what pot to buy.
After searching the web for suitable ones, I see there is a variety of measures and I wouldn't like to work on the wood, just to swap the pots and soldering. I guess shaft diameter (to adjust to the original hole ) and length of the pot (to fit in the cavity) are the important dimensions to take into consideration but I'm somehow lost.
Perhaps is a silly question but the Soloist is the best guitar I'll ever have (my wife will not allow such an expense never again

many thanks
Comment