Making a neck plate...what are the dimensions?

[dinkyguitar]

Hi All,

I was considering making a neck plate but I don't have the dimensions...

Does anyone have the size and screw hole locations?

dinkyguitar

[Devotee]

Depends on the guitar but why not check out fretsonthenet.com for neckplates.

[ginsambo]

What you wanna do is get a San Dimas Neck plate, paint the voids with some sand, take a plaster cast of it, stratch out the Made in USA part under the Logo, then make a wax replica from it, float the wax to depth and send it to a lost wax foundry, where they'll make you another! Of course the Writing will still be the wrong font but you might fool yourself.

Why not buy a neckplate? They are only like about $3.00 for a shiny Jackson import one.

[straycat]

Depends on the guitar but why not check out fretsonthenet.com for neckplates.

+1

[dinkyguitar]

Thanks guys....

I'll checkout the frets website.....

Also, I found the measurements on the warmoth site...

Thanks again,
dinkyguitar