Tweet
I resold that snake I got from John as I just have become addicted to top mount floyds. BUT I had an idea before she left and gave it a shot. This will only work if you have access to a syringe with a few small needles.
The edge was starting to lift so I took an exacto knife and slit it open down the length of the lift....Dangerous but I wanted to try it.
I then took the needles and injected clearcoat from one of those auto scratch pens into the slit. I did enough to fill it and then clamped it and blocked it with a block of wood and wood clamps...(duh)
So after it sat for 2 days I backed it off and light sanded and polished the edge. It cleaned up about 85% of it and it was solid....it is prob not a permanant fix and if you don't know what your doing with clear it could end bad.
I forgot to take a damn pic but if I come across another like this I will post a step by step on what I do....IF it works again lol
I almost wonder if you could inject super glue as well or would it white under those conditions?
The edge was starting to lift so I took an exacto knife and slit it open down the length of the lift....Dangerous but I wanted to try it.
I then took the needles and injected clearcoat from one of those auto scratch pens into the slit. I did enough to fill it and then clamped it and blocked it with a block of wood and wood clamps...(duh)
So after it sat for 2 days I backed it off and light sanded and polished the edge. It cleaned up about 85% of it and it was solid....it is prob not a permanant fix and if you don't know what your doing with clear it could end bad.
I forgot to take a damn pic but if I come across another like this I will post a step by step on what I do....IF it works again lol
I almost wonder if you could inject super glue as well or would it white under those conditions?
Comment