Hi. I have a 1990 USA Randy that I just dug out. It's spent most of it's life in it's case. Anyway, I figured that I should enjoy it and was adjusting the pickups trying to get it to sound more to my liking, it has a kind of harsh sound now, and a screw came undone so I had to totally take out the bridge pickup to fix it. To my surprise I found a j80 instead of what should be a j-50. I always wondered why the guitar had much more output/noise then my Charvel models 4 and 6 and why the 1200 midboost didn't seem to work all that much. Used with my other guitars it has a lot more effect.
What I'm wondering is if you guys think I should either try to locate some j50bc's etc for the guitar or ditch the 1200 and wire the j80 normally. I assume the neck pickup is also a j80. Maybe the 1200 is overkill will with what's currently in the guitar.
Any opinions on what you'd do would be greatly appreciated.
Thanks guys.
What I'm wondering is if you guys think I should either try to locate some j50bc's etc for the guitar or ditch the 1200 and wire the j80 normally. I assume the neck pickup is also a j80. Maybe the 1200 is overkill will with what's currently in the guitar.
Any opinions on what you'd do would be greatly appreciated.
Thanks guys.
Comment