I recently purchased a 1988 Jackson and as I was cleaning the fret board I noticed that the base of the frets were not flush to the fret board. This is seen more on the first string side of the board. The frets are probably not radiused enough. The frets look too good so it has to be a refret.
Should I try to press the frets in if the they have not been properly radiused? If so, what are some tips in pressing in the frets with common tools?
Thanks!
Should I try to press the frets in if the they have not been properly radiused? If so, what are some tips in pressing in the frets with common tools?
Thanks!
Comment