which size truss rod wrench for jackson jdr 94???

[Bigfknbang]

hey guys baught a jdr 94 neck and body off a dude here a couple years ago and finally got around to getting it together got the pickups and trem in. neck is on, new tuners, painted the body. i don't have the truss rod wrench to fit it lol. that sux! all my other guitars use allen wrenches for the truss rod. so i'm going to order one but i don't know which size to order. i google searched it and got a bunch of different answers help me out i'll post a vid when it's done. its a Truss Rod Hex Box Wrench acording to all the ebay listings just need to know the size.

[Bigfknbang]

https://www.facebook.com/photo.php?fbid=3667352882427&set=a.1888742698284.2091839.1232958718&type=1&theater

[plon]

It's 7mm. Here's one for Ibanez but will work for yours. http://www.ebay.com/itm/Ibanez-7mm-p...item27c074d232

[Bigfknbang]

thank you it's going to rock \m/\m/

[silar]

You can send an e-mail to Jackson and they will send one to you for free. Just tell them that you need the 7mm socket truss rod wrench and not the Allen wrench. I saw a post or two on here where forum members tried it, so I did too.. Got one in the mail!

[cullenszoo]

I like the idea of getting free one from Jackson but I can't find a link on their site to request one.

I picked up a real cheap socket set from the Dollar General store. Like $5 and used the 7mm socket to adjust mine.

[j2379]

yeah i could use a real one from Jackson, Ive found the best thing is a high quality 10-12 in one screw driver. I say high quality because those have a thin enough wall to fit between the nut and the route, and are also strong enough not to crack. & i thought it was 1/4" not 7mm (or are they the same).

I like the idea of getting free one from Jackson but I can't find a link on their site to request one.

I picked up a real cheap socket set from the Dollar General store. Like $5 and used the 7mm socket to adjust mine.

[silar]

I like the idea of getting free one from Jackson but I can't find a link on their site to request one.

I picked up a real cheap socket set from the Dollar General store. Like $5 and used the 7mm socket to adjust mine.

Send an e-mail to [email protected]

That's what I did, including my home address. Got a reply a few days later that it was in the mail!

[Bigfknbang]

sent jackson an email

[Bigfknbang]

jackson sent me the nut wrench for free also put a dimarzio steve vai gravity storm neck pickup and gfs crunchy rails bridge humbucker in it \m/\m/