Tweet
I'm pulling my hair out on this one. It's Charvel 3B with older hard wired EMG P/J set wired for 2 vol, 1 tone and a 3way. It's wired correctly to every diagram I've pulled up. I've gone over it like 10 times. The problem is when the 3 way has both pickups are on both volumes act as master instead of just for their specific pickup. Any idea where I can look for the problem? I've replaced the pots and the switch one item at a time and they are all good. Something is looping these two pots together and it's driving me insane!!!!!!! Help a brutha out!
-
"My G-Major can blow me!" - Bill -
Just so we're all on the same page, you're using the following schematic:
Taken from this site:
"Your work is ingenius…it’s quality work….and there are simply too many notes…that’s all, just cut a few, and it’ll be perfect." -
Thats not the one I used, but it's the same as the one I used. I figured it out. I had the hot and output lugs reversed. It's been so long since I hardwired EMG's I forgot that it made a difference with them."My G-Major can blow me!" - BillComment
Comment